Cheapest & Original Standards For Selling

Cheapest Original BSI Standards 2-69

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm

 

BS EN 50377-8-4:2007 BS EN 50377-8-4:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
06/30154770 DC 06/30154770 DC. EN 60050-212. International Electrotechnical Vocabulary (IEC). Chapter 212. Insulating solids, liquids and gases
BS EN 62305-1:2006 BS EN 62305-1:2006. Protection against lightning. General principles
BS EN 62305-3:2006 BS EN 62305-3:2006. Protection against lightning. Physical damage to structures and life hazard
BS EN 61290-7-1:2007 BS EN 61290-7-1:2007. Optical amplifiers. Test methods. Out-of-band insertion losses. Filtered optical power meter method
BS EN 61291-2:2007 BS EN 61291-2:2007. Optical amplifiers. Digital applications. Performance specification template
BS 594987:2007 BS 594987:2007. Asphalt for roads and other paved areas – Specification for transport, laying and compaction and type testing protocols.
BS EN 14116:2007 BS EN 14116:2007. Tanks for transport of dangerous goods. Digital interface for the product recognition device
BS ISO 5496:2006 BS ISO 5496:2006. Sensory analysis. Methodology. Initiation and training of assessors in the detection and recognition of odours
06/30154871 DC 06/30154871 DC. BS ISO 4254-8. Agricultural machinery. Safety. Part 8. Solid fertilizer distributors
BS EN 196-7:2007 BS EN 196-7:2007. Methods of testing cement. Methods of taking and preparing samples of cement
BS ISO 12082:2006 BS ISO 12082:2006. Processed cheese and processed cheese products. Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid
ISO3369 : 2006 EDTN2 ISO3369 : 2006 EDTN2. ISO3369 :2006 Impermeable sintered metal materials and hardmetals – Determination of density
08/30154948 DC 08/30154948 DC. BS ISO 21809-4. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 4. Polyethylene coatings (2-layer PE)
BS EN 4382:2006 BS EN 4382:2006. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm
BS EN 4383:2006 BS EN 4383:2006. Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock
BS EN 3976:2006 BS EN 3976:2006. Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content
BS EN 3668:2006 BS EN 3668:2006. Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm
BS EN 3114-004:2006 BS EN 3114-004:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. Microstructure of sheet for superplastic forming
BS EN 3114-003:2006 BS EN 3114-003:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. Microstructure of plate
BS EN 3114-002:2007 BS EN 3114-002:2007. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. Microstructure of bars, sections, forging stock and forgings
BS EN 3114-001:2006 BS EN 3114-001:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. General requirements
BS EN 3339:2006 BS EN 3339:2006. Aerospace series. Aluminium alloy AL-P7010-T76. Die Forgings. a ≤ 200 mm
PAS 2010:2006 PAS 2010:2006. Planning to halt the loss of biodiversity
BS 8494:2007 BS 8494:2007. Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods
BS EN 50377-8-5:2007 BS EN 50377-8-5:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
BS EN 50377-8-6:2007 BS EN 50377-8-6:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-7:2007 BS EN 50377-8-7:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-8:2007 BS EN 50377-8-8:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
06/30155065 DC 06/30155065 DC. EN 61754-24. Fibre optic connector interfaces. Part 24. Type SC-RJ connector family
BS EN 15330-2:2008 BS EN 15330-2:2008. Surfaces for sports areas. Synthetic turf and needle- punched surfaces primarily designed for outdoor use. Specification for needle-punched surfaces
BS EN 15301-2:2007 BS EN 15301-2:2007. Surfaces for sports areas. Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory
BS ISO 12043:2007 BS ISO 12043:2007. Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
BS ISO 246:2007 BS ISO 246:2007. Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
06/30155268 DC 06/30155268 DC. ISO 12460-2. Wood-based panels. Determination of formaldehyde release. Part 2. Small-scale chamber method
06/30155271 DC 06/30155271 DC. ISO 12460-3. Wood-based panels. Determination of formaldehyde release. Part 3. Gas analysis method
ISO12460-3 : 2008 EDTN1 ISO12460-3 : 2008 EDTN1. ISO 12460-3 Wood-based panels – Determination of formaldehyde release. Part 3: Gas analysis method
06/30155274 DC 06/30155274 DC. ISO 12460-4. Wood-based panels. Determination of formaldehyde release. Part 4. Desiccator method
ISO12460-4 : 2008 EDTN1 ISO12460-4 : 2008 EDTN1. ISO 12460-4 Wood-based panels – Determination of formaldehyde release. Part 4: Desiccator method
BS 7176:2007 BS 7176:2007. Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS EN 14528:2007 BS EN 14528:2007. Bidets. Functional requirements and test methods
06/30155363 DC 06/30155363 DC. EN 60853-1 AMD 2. Calculation of cyclic and emergency current rating of cables. Part 1. Cyclic rating factor for cables up to and including 18/30 (36) kV
06/30155366 DC 06/30155366 DC. EN 60853-2 AMD 1. Calculation of cyclic and emergency current rating of cables. Part 2. Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
06/30155368 DC 06/30155368 DC. EN 14879-6. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 6. Combined linings with tile and brick layers
BS EN 61228:2008 BS EN 61228:2008. Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
ISO/TR15403-2 : 2006 EDTN1 ISO/TR15403-2 : 2006 EDTN1. ISO/TR 15403-2 Natural gas – Natural gas for use as a compressed fuel for vehicles. Part 2: Specification of the quality
06/30155398 DC 06/30155398 DC. EN 2234. Cables, electrical, fire resistant. Technical specification
06/30155419 DC 06/30155419 DC. EN 61058-2-1 AMD 2. Switches for appliances. Part 2-1. Particular requirements for cord switches
ISO/PAS26183 : 2006 EDTN1 ISO/PAS26183 : 2006 EDTN1. ISO/PAS 26183 SASIG Product data quality guidelines for the global automotive industry
06/30155498 DC 06/30155498 DC. ISO 4126-10. Safety devices for protection against excessive pressure. Part 10. Sizing of safety valves and connected inlet and outlet lines for gas/liquid two-phase flow
BS ISO 28000:2007 BS ISO 28000:2007. Specification for security management systems for the supply chain
DD ISO/PAS 28004:2006 DD ISO/PAS 28004:2006. Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000
BS ISO 1739:2006 BS ISO 1739:2006. Butter. Determination of the refractive index of the fat (reference method)
BS ISO 3889:2006 BS ISO 3889:2006. Milk and milk products. Specification of Mojonnier-type fat extraction flasks
06/30155557 DC 06/30155557 DC. EN 71-5 AMD 2. Safety of toys. Part 5. Chemical toys (sets) other than experimental sets
BS 6231:2006 BS 6231:2006. Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
BS 7671:2008 BS 7671:2008. Requirements for electrical installations. IEE Wiring Regulations. Seventeenth edition
06/30155617 DC 06/30155617 DC. EN 60076-12. Power transformers. Part 12. Loading guide for dry-type power transformers
BS EN ISO 9169:2006 BS EN ISO 9169:2006. Air quality. Definition and determination of performance characteristics of an automatic measuring system
ISO/IEC 21000-8:2008 (CDROM)HEADER EDTN2 ISO/IEC 21000-8:2008 (CDROM)HEADER EDTN2. ISO/IEC21000-8 : 2008 Information technology. Multimedia framework (MPEG-21). Part 8. Reference Software
ISO/TS22809 : 2007 EDTN1 ISO/TS22809 : 2007 EDTN1. ISO/TS22809 : 2007 Non-destructive testing. Discontinuities in specimens for use in qualification examinations
BS EN 50194-2:2006 BS EN 50194-2:2006. Electrical apparatus for the detection of combustible gases in domestic premises. Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises. Additional test methods and performance requirements
BS ISO 8470:2006 BS ISO 8470:2006. Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
06/30155753 DC 06/30155753 DC. ISO 1750. Pesticides and other agrochemicals. Common names
BS EN 61996-2:2006 BS EN 61996-2:2006. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results
BIP 3073:2006 BIP 3073:2006. Environment labelling and lifecycle assessment CD-ROM
BIP 3075:2006 BIP 3075:2006. Environment management systems CD-ROM
BIP 0060:2006 BIP 0060:2006. Spatial datasets for geographical referencing. BS 7666 collection CD-ROM
DD CEN/TS 14159:2007 DD CEN/TS 14159:2007. Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
BS EN ISO 3251:2008 BS EN ISO 3251:2008. Paints, varnishes and plastics. Determination of non- volatile-matter content
06/30155776 DC 06/30155776 DC. BS EN 197-4 AMD 1. Cement. Part 4. Composition, specifications and conformity criteria for low early strength blast furnace cements
BS EN 62379-1:2007 BS EN 62379-1:2007. Common control interface for networked digital audio and video products. General
BS EN 13999-2:2007 BS EN 13999-2:2007. Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
BS EN ISO 21415-1:2007 BS EN ISO 21415-1:2007. Wheat and wheat flour. Gluten content. Determination of wet gluten by a manual method
BS EN ISO 21415-3:2007 BS EN ISO 21415-3:2007. Wheat and wheat flour. Gluten content. Determination of dry gluten from wet gluten by an oven drying method
BS EN ISO 21415-4:2007 BS EN ISO 21415-4:2007. Wheat and wheat flour. Gluten content. Determination of dry gluten from wet gluten by a rapid drying method
08/30155823 DC 08/30155823 DC. BS EN ISO 13503-2 AMD1. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 2. Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
DD CEN/TS 15590:2007 DD CEN/TS 15590:2007. Solid recovered fuels. Determination of potential rate of microbial self heating using the real dynamic respiration index
PD CEN/TR 15591:2007 PD CEN/TR 15591:2007. Solid recovered fuels. Determination of the biomass content based on the 14C method
06/30155852 DC 06/30155852 DC. BS EN 60286-3-VI. Packaging of components for automatic handling. Part 3. Type VI. Packaging of surface mount components on blister carrier tapes 4 mm in width
06/30155866 DC 06/30155866 DC. BS EN 62451. HSSDC-2 shielded connectors
06/30155872 DC 06/30155872 DC. IEC/TS 62452. Testing and performance requirements for high speed serial and parallel-serial copper links
BS EN 3476:2006 BS EN 3476:2006. Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 3479:2007 BS EN 3479:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Plate. 6 mm < a ≤ 20 mm. 1070 MPa ≤ Rm ≤ 1220 MPa
BS EN 3490:2007 BS EN 3490:2007. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1100 MPa
BS EN 3491:2006 BS EN 3491:2006. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 900 MPa ≤ Rm ≤ 1100 MPa
BS EN 3527:2007 BS EN 3527:2007. Aerospace series. Steel FE-PL1504 (33CrMoV12). Air melted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 3531:2007 BS EN 3531:2007. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 3532:2007 BS EN 3532:2007. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Plate. 6 mm $3Q a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 3671:2007 BS EN 3671:2007. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm
BS EN 3678:2007 BS EN 3678:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa
BS EN 3684:2007 BS EN 3684:2007. Aerospace series. Test methods. Titanium alloy wrought products. Determination of β transus temperature. Metallographic method
BS EN 2469:2007 BS EN 2469:2007. Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa
BS EN 2821:2007 BS EN 2821:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1310 MPa
KIT 193 KIT 193. Software engineering. Product quality kit
BS EN 140401-803:2007 BS EN 140401-803:2007. Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 140401-802:2007 BS EN 140401-802:2007. Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2
BS EN 140401-801:2007 BS EN 140401-801:2007. Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
ERROR – CWA15596 : 2006 ERROR – CWA15596 : 2006.
CWA 15596:2006 CWA 15596:2006. Code of practice on cleanability of commercial food equipment used in the retail and catering sectors
BS EN 140100:2008 BS EN 140100:2008. Sectional specification. Fixed low power film resistors
PD CLC/TR 50456:2008 PD CLC/TR 50456:2008. Alarm systems. Guidelines to achieving compliance with EC directives for equipment of alarm systems
BS ISO 28004:2007 BS ISO 28004:2007. Security management systems for the supply chain. Guidelines for the implementation of ISO 28000
BS EN 137:2006 BS EN 137:2006. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking
DD ISO/TS 3716:2006 DD ISO/TS 3716:2006. Hydrometry. Functional requirements and characteristics of suspended-sediment samplers
BS 6400-1:2006 BS 6400-1:2006. Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3/h. Low pressure (2nd family gases)
08/30156013 DC 08/30156013 DC. BS EN ISO 21987. Ophthalmic optics. Mounted spectacle lenses
BIP 2089:2006 BIP 2089:2006. A Guide to corporate social responsibility
DD ISO/TS 23081-2:2007 DD ISO/TS 23081-2:2007. Information and documentation. Records management processes. Metadata for records. Conceptual and implementation issues
08/30156074 DC 08/30156074 DC. BS EN 1012-3. Compressors and vacuum pumps. Safety requirements. Part 3. Process compressors
06/30156096 DC 06/30156096 DC. ISO CEN TS 12977-3. Performance test methods. Thermal solar systems and components. Custom built systems. Part 3. Performance test methods for solar water heater stores
BS EN ISO 1248:2008 BS EN ISO 1248:2008. Iron oxide pigments. Specifications and methods of test
BS EN 3475-203:2006 BS EN 3475-203:2006. Aerospace series. Cables, electrical, aircraft use. Test methods. Dimensions
06/30156146 DC 06/30156146 DC. IEC/TS 62450. Technical specification for 40 pin SCA 2 connector with parallel selection
06/30156182 DC 06/30156182 DC. BS EN 61753-022-2. Fibre optic interconnecting devices and passive components. Performance standard. Part 022-2. Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
06/30156187 DC 06/30156187 DC. BS EN 61753-121-2. Fibre optic interconnecting devices and passive components. Terminated cable assemblies part. Part 121-2. Performance standard for simplex and duplex cords with singlemode fibre optic cylindrical ferrule connectors for category C. Controlled environment
BS EN 14682:2007 BS EN 14682:2007. Safety of children’s clothing. Cords and drawstrings on children’s clothing. Specifications
BS EN 50411-2-3:2007 BS EN 50411-2-3:2007. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed inline fibre splice closures Type 1, for category S & A
BS EN 50378-3-1:2007 BS EN 50378-3-1:2007. Passive components to be used in optical fibre communication systems. Product specifications. Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
BS EN 50377-10-1:2007 BS EN 50377-10-1:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-9:2007 BS EN 50377-8-9:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
06/30156243 DC 06/30156243 DC. BS EN 197-1 AMD 2. Cement. Part 1. Composition, specifications and conformity criteria for common cements
BS EN 50464-2-2:2007 BS EN 50464-2-2:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1
BS EN 50464-2-3:2007 BS EN 50464-2-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1
BS EN 50464-4:2007 BS EN 50464-4:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Requirements and tests concerning pressurised corrugated tanks
BS EN 50464-3:2007 BS EN 50464-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal currents

Cheapest Original BSI Standards 2-9000

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal

for ASTM Standards

Search & Listing Portal

for ISO Standards

Search & Listing Portal

for IEC Standards

Search & Listing Portal

for BSI Standards

Search & Listing Portal

for DIN Standards

ISO16120-3 Specific requirements for rimmed and rimmed substitute low carbon steel rod
ISO16120-2 Specific requirements for general purpose rod
ISO16120-1 General requirements
ISO14594
BS EN 13920-1
ISO7452
ISO17637
WD/ISO4720
ISO16133
BS EN 13595-4
BS EN 13595-3
BS EN 13595-2
ISO/TR15855
WD/ISO5364
BS EN ISO 8318
BS EN ISO 2873
BS EN ISO 2875
BS EN ISO 2247
BS EN ISO 2244
BS EN ISO 2234
BS EN 60368-4 2000
BS 7184
WD/ISO10993-12 Sample preparation and reference materials
BS EN 60068-2-18 2000
PD ISO/TR 10013 2001
BS EN ISO 16106
BS EN ISO 16467
BS EN 61076-5 2001
BS EN 60746-1
BS EN 61131-5 2000
BS EN 60534-6-2 2000
BS EN 60534-3-2 2001
BS IEC 61520
BS EN 60216-1 2001
BS 1722-14
BS EN 60216-3
BS EN 61514
BS EN 60684-3-246
ISO11040-5 Plungers and plastic rods for injectables
BS ISO/IEC 9126-1
BS EN 61300-3-7 2000
BS 598-112
BS 8424
BS 6400-1
ISO12076
BS 6896
BS 5864
BS 123300
BS 123200
BS 123100
DC01/203089 DC01/203089
ISO/TR15599
BS EN 50271
BS EN 50151
BS EN 62011-1
BS EN 61061-3-2 2001
BS EN 61280-2-8
BS ISO/IEC 15476-2
DD ENV 1996-1-3
BS EN 61959
BS 341-3
ISO/IEC14776-112 Parallel Interface-2 (SCSI SPI-2)
BS 7971-3
ISO17492
WD/ISO17491
BS EN 60335-2-7
WD/ISO/TS16071
BS EN 588-2
BS EN 15090
BS EN 60749-5
05/19975833 DC 05/19975833 DC
BS EN 60603-7-1
DD ENV 14164
BS EN 50144-2-14
BS EN 61000-4-29 2000
BS EN 61000-4-13 2002
BS EN 60819-3-4 2001
BS EN 60819-3-2 2001
BS EN 60819-3-1 2001
BS EN 60684-3-209
BS EN 60684-3-121 to 124 2001
BS EN 60684-3-100 to 105 2001
BS EN 60684-3-145 to 147
06/19976125 DC 06/19976125 DC
WD/ISO16630
BS EN ISO 14539
BS EN ISO 3269
BS 8213-1
BS EN ISO 12543-2
06/19976237 DC 06/19976237 DC
ISO15765-4 Requirements for emission-related systems
ISO15765-3 Implementation of unified diagnostic services (UDS on CAN)
ISO15765-2 Network layer services
WD/ISO11193-1 Specification for gloves made from rubber latex or rubber solution
BS EN 13201-4
ISO16720
BS EN 13201-2
ISO6182-1
PD CEN/TR 13201-1
DD ISO/TS 16628
BS 5970
ISO11992-1 Physical and
WD/ISO6597
ISO16845
ISO16844-1 Electrical connectors
BS 5306-4
05/19976767 DC 05/19976767 DC
ISO14657
ISO14132-4 Terms for astronomical telescopes and alphabetic index o
ISO14132-3 Terms for telescopic sights
06/19976807 DC 06/19976807 DC
ISO14132-2 Terms for binoculars, monoculars and spotting scopes
BS EN 960
BS EN 61952
BS EN ISO 11606
ISO15812
WD/ISO4995
06/19977015 DC 06/19977015 DC
BS EN 12258-3
ISO15782-1 Public Key Certificates
BS EN 61993-1 1999
BS EN 61083-1 2001
BS EN 60243-2 2001
BS EN 60243-3 2001
BS EN 13538-3
BS EN 13538-2
BS EN 61010-031 2002
DD ENV 13797
03/106720 DC 03/106720 DC
BS EN 13540
ISO3475
ISO8901
ISO1102
ISO4165
ISO8686-2
ISO14518
PD ISO/TR 14799-1
DD ISO/TS 14798
ISO/IEC14496-5 AMD1(12/02)CD-ROM ISO/IEC14496-5 AMD1(12/02)CD-ROM
DD ENV 839
BS EN 50065-7
BS EN 50065-4-1
BS EN 50340
BS EN 61968-1
PD IEC TR 61850-1
DD IEC TS 61334-5-3
BS IEC 61334-3-1
BS EN 50216-4
BS EN 50216-7
BS EN 50216-1
PD ISO/IEC TR 15443-1
PD ISO/IEC TR 15446
ISO15708-1 Principles
PD IEC TR 62059-21
PD IEC TR 62059-11 2002
PD IEC TR 62051 1999
BSEN693
BS EN 60679-3 2001
BS EN 60368-3 2001
BS EN 60122-3
ISO15707
ISO14329
BS EN 13274-7
BS EN 61823
BS EN 61753-2-3 2001
03/310514 DC 03/310514 DC
BS EN 62041
BS EN 61986 2002
BS EN 61982-2
ISO3054
ISO14341
ISO14174
ISO14171
BS EN 61249-2-19 2001
05/19978685 DC 05/19978685 DC
DD 7995
ISO16024
PD ES 59008-5-2 2001
PD ES 59008-5-1 2001
ISO3523
ISO6469-3 Protection of persons against electric hazards
ISO6469-2 Functional safety means and protection against failures
ISO6469-1 On-board energy storage
BS EN 61558-2-20 2000
BS EN 61029-2-8
BS EN 61029-2-5
BS ISO 16329
BS EN 61094-5 2001
ISO3760
ISO3757
ISO16143-2 Semi-finished products, bars, rods and sections
ISO16143-1 Flat products
ISO3848
ISO3809
ISO3524
ISO3053
ISO16391
BS EN ISO 11897
ISO/IECTR15067-4 Application model
BS EN 61821
BS EN 61822
BS EN ISO 15867
BS EN 60034-18-22 2000
BS EN 61837-3 2000
BS EN 61837-2
BS EN 61243-5
BS EN 61984 2001
BS EN 60898-2
ISO15787
DD IEC/PAS 60044-5
ISO11119-1 Hoop wrapped composite gas cylinders
ISO11119-2 Fully-wrapped fibre reinforced composite gas cylinders
ISO11119-3
ISO3518
BS EN 61076-4-108
BS EN 60512-12-7 2001
BS ISO/TS 13399-2
ISO/IEC7816-11 Personal verification through biometric methods
BS EN 60255-24 2001
BS EN 60255-22-3 2000
BS EN 60645-1 2001
ISO11623
BS ISO 6621-2
BS ISO 6622-2
BS ISO 6624-4
BS ISO 6624-2
ISO16037
ISO16038
BS EN 50274
DD 253
WD/ISO10384
WD/ISO9364
WD/ISO6932
BS 7987
BS ISO 15829
BS CECC 96601
BS EN 196-9
BS EN 196-8
BS ISO 2303
BS EN 60384-1
BS IEC 61865
BS EN 187200
BS EN 13543
BS EN 13538-1
BS 7935-2
ISO13602-1 General
BS EN 61587-2 2000
ISO/IEC15776
BS EN 61076-4-107 2001
BS 123000
BS EN 12845
BS 7894
WD/ISO/IEC15444-4 Conformance testing
BS EN 61076-3-100
BS EN 60512-20-2 2000
ISO407
BS EN 50083-5
BS EN 60512-6-5
06/19981525 DC 06/19981525 DC
BS ISO/IEC 13249-5
ISO8458-3 Oil hardened and tempered wire
BS EN 60255-5 2000
ISO8458-2 Patented cold drawn unalloyed steel wire
ISO13851
BS EN 1264-4
BS EN 60335-2-99
BS EN 61603-6
DC03/100280 DC03/100280
06/19982093 DC 06/19982093 DC
ISO15662
WD/ISO/IEC15438
BS EN 61996 2000
ISO11799
BS EN 50128
BS EN 50207
BS EN 61537 2001
BS EN 50085-2-3
BS EN 60127-10 2001
ISO15538
05/19982631 DC 05/19982631 DC
ISO8458-1 General requirements
PD CR R210-010
ISO15531-1 General overview
ISO/TS17261
ISO5436-2 Profile method Calibration
ISO15174
ISO3517
ISO6182-9 Requirements and test methods for water mist nozzles
ISO15800
BS EN 50144-2-13
WD/ISO7396-1 Pipelines for compressed medical gases and vacuum
BS EN 50152-3-3
BS IEC TS 60695-9-2
BS EN 50292
ISO14960
BS EN 50159-2
ISO/IEC14165-141 Fabric Generic Requirements (FC-FG)
BS EN 13721
BS EN 50243
BS EN 61496-3 2001
BS 7533-8
BS EN 61754-9
BS EN 61754-5 1996
BS EN ISO 15883-3
BS EN ISO 15883-2
BS EN ISO 15883-1
BS EN 60270 2000
BS EN 60052
BS EN 196-5
BS EN 196-3
BS EN 196-2
BS EN 196-1
BS EN 61534-1
ISO15384
BS EN 388
BS EN 12332-2
ISO12716
BS EN 13809
BS EN 61427
BS EN 50124-2
DD CEN/TS 14383-4
DD CEN/TS 14383-3
DD ENV 14383-2
BS EN 14383-1
WD/ISO15194
WD/ISO15193
BS 5950-2
BS EN 60454-3-19
BS EN 60454-3-18
BS EN 60454-3-17 2001
BS EN 60454-3-15 2001
BS EN 60454-3-14 2001
DD ENV 1994-2
ISO/TS19103
BS EN 50119
BS EN 50291
BS EN 50238
ISO10196
DC01/203086 DC01/203086
BS EN 12094-1
BS EN 50272-2
ISO14256-2
BS 7972
BS 6164
BS EN 12405
ISO11393-4 Test methods and performance requirements for chain-saw protective g
ISO15322
ISO15172
04/19985115 DC 04/19985115 DC
ISO10303-24 Implementation methods C lang
05/19985193 DC 05/19985193 DC
ISO3515
BS EN 14317-1
BS EN 14316-1
BS EN 61000-2-12
BS 903-0
WD/ISO7718
ISO15685
BS EN 60953-3 2001
BS EN 40-2
BS EN 13537
BS EN 13536
BS EN 13542
04/19985587 DC 04/19985587 DC
WD/ISO9445
WD/ISO9444
BS EN ISO 10211-2
ISO3864-1 Safety signs in workplaces and public areas- Design principles
ISO6182-7 Requirements and test methods for early suppression fast response (ESFR) sprink
ISO7301
ISO/TR14569-1
ISO/TR14933
ISO770
BS EN ISO 14902
ISO14573
ISO13993
ISO13584-24 Logical model of supplier library
04/19986707 DC 04/19986707 DC
ISO14131
BS EN 50191
BS 8432
BS ISO 14154
ISO10833
ISO12710
BS EN ISO 8442-5
BS EN 61685 2001
ISO13641-2 Test at low biomass concentrations
ISO13625
ISO13626
WD/BSISO14560
WD/ISO14572
ISO/IEC15816
WD/ISO14607
ISO/TS12104
WD/ISO/TS14167
PD CR 13933 2000
BS EN 2591-100
04/19987805 DC 04/19987805 DC
BS EN 50260-2-14
BS EN 50260-2-10
BS EN 50260-2-7
BS EN 50260-2-6
BS EN 50260-2-5
BS EN 50260-2-4
BS EN 50260-2-2
BS EN 50260-2-1
BS EN 50260-1
BS EN 61192-2
BS EN 61391-1
BS EN 13634
BS EN 13594
ISO11873
BS ISO 3601-3
WD/ISO3601-1 Inside diameters, cross-sections tolerances and size identification code
ISO14254
ISO14256-1
BS 6656
BS EN ISO 10088
BS EN 14730-1
BS EN 50171
BS 8403
ISO128-1 Basic conventions- Lines
BS 6463-102
ISO13897
ISO/IEC13818-4
BS EN 13402-2
ISO/IEC14492
BS ISO 8015
PD IEC TR 62248
ISO13520
05/19988811 DC 05/19988811 DC
ISO2173
BS EN 527-2
BS 7906-1
BS EN ISO 5436-1
BS EN 61029-2-9
BS ISO 10209-1
BS 5709
BS 7870-7
BS 8000-3
03/108782 DC 03/108782 DC
ISO13355
WD/ISO11979-6 Determination of shelf-life and transport stability
ISO13559
BS EN ISO 3381
BS EN ISO 3095
BS EN 13830
BS EN 13779
DD ENV 13696
BS EN 13595-1
BS EN 1008
EN13852-1 CORR1 (12/04) EN13852-1 CORR1 (12/04)
BS 6262-7
BS 6262-1
BS IEC 60747-8
BS EN 13698-1
ISO2692
BS EN 61192-1
ISO2560
WD/ISO13958
WD/ISO13959
ISO13960
PD CEN/TR 15135
WD/ISO4952
ISO2928
BS ISO 12656
BS EN 13583
BS EN 13789
ISO7358
ISO5129
DD CEN/TS 12666-2
ISO8898
WD/ISO10605
ISO12616
ISO10972-3 Tower cranes
BS EN 617
ISO11835
ISO139
DD CEN/TS 15122
ISO10303-204 Application protocol- Mech
DC04/19993047 DC04/19993047
ISO10381-5 Guidance on the procedure for the investigation of urban and industrial sites
ISO501
WD/ISO3522
ISO115
ISO15763
BS EN 14963
ISO5982
BS EN 61158-4
BS EN 61158-3
BS EN 60335-2-103
DD 257-3
DD 257-5
05/19993827 DC 05/19993827 DC
ISO11264
ISO10382
BS 7952
ISO10464
BS EN 60076-10 2001
ISO8820-4 Fuse-links with female contacts (type A) and bolt-in contacts (type B)
ISO8820-3 Fuse-links with tabs (blade type)
BS EN 61558-2-12
ISO/IEC14776-232 Serial Bus Protocol 2 (SBP-2)
ISO12168-2 Characteristic
ISO12130-3 Guide values for the calcul
ISO12130-2 Functions for calculation o
ISO12130-1 Calculation of tilting pad
BS EN 61558-2-19 2000
BS EN 60427 2000
ISO5692-1 Dimensions for hitch-rings
BS EN 4434
BS 3680-3Q
WD/ISO4040
BS 6207-3
BSISO/IEC15948 Functional Spec
ISO9455-17 Surface insulation resistance, comb test and electrochemical migration test of flux
ISO/IEC10589
BS 7979
BS EN 60255-22-6
ISO/IECISP12062-6
ISO/IECISP12062-5
ISO/IECISP12062-4
ISO/IECISP12062-3
ISO/IECISP12062-2
ISO/IECISP12062-1
BS 6915
ISO3601-5 Suitability of elastomeric materials for industrial applications
BS 6203
ISO5349-2 Practical guidance for meas
ISO4306-3
BS 6121-1
ISO10691
WD/ISO4141-4 Articulation test method and requirements for coiled cable assemblies
ISO9564-1 PIN protection principles and techniques
BS EN 50216-6
BS 644
BS EN 50090-8
ISO/TR15801
BSISO/IEC14756
ISO1302
BS 6375-1
ISO14993
ISO10426-2 Testing of well cements
BS 7935-1
WD/ISO3862-1 Oil-based fluid
WD/ISO1436-1 Oil-based fluid applications
ISO1703
BS EN 61158-5
BS EN 61158-6
BS ISO/IEC 10967-2
ISO9123
WD/ISOTS13571
ISO15501-1 Safety Requirements
ISO15501-2 Test methods
BS EN 50144-2-15
BS EN 50144-2-16
BS EN 61922
WD/ISO1893
ISO129-1 General principles
ISO/TR15300
ISO148-1
BS 7923
ISO14132-1 General terms
ISO15031-1
BS EN 12841
BS 6262-4
BS 7977-1
ISO14227
ISO12106
ISO12135
ISO14870
ISO12576-1 Factory made
ISO14344
ISO14343
ISO11228-1 Lifting and carrying
BS EN 60819-2 2001
DD ENV 1729-1
BS 7912
BS 7922
BS 6498
BS 8220-3
BS ISO/IEC 14495-1
BS 7905-1
BS G 257-3
ISO6916-2 Mouldings and extrusions
BS 6262-6
BS 6262-3
BS 6262-2
BS EN 12284
ISO12243
ISO10576-1 General principles
ISO10381-4 Guidance on the procedure for the investigation of natural and cultivated sites
ISO11222
ISO16797
ISO6962
BS EN 60455-3-5 2001
BS ISO 5530-4
BS ISO 16649-2
BS ISO 16649-1
BS EN ISO 14939
ISO12795
BS EN 12280-2
BS EN 12280-3
BS EN 13521
BS EN 13519
BS EN 13515
BS EN 13514
BS EN 13512
BS EN 13522
BS EN 13517
BS EN 13579
BS EN 13581
BS EN 60872-3 2000
BS EN 62107 2000
BS EN 13584
BS EN 13578
BS EN 13580
BS EN 13395-4
BS EN 61076-3-103
BS EN 60512-25-2
BS ISO 6550-3
ISO12800
BS EN 60893-2
BS EN 50324-1
DD ISO/TS 13399-3
DD ISO/TS 13399-4
BS ISO 15860
BS ISO 16458
BS ISO 14711
BS ISO 14619
BS ISO 14950
BS EN 13380
BS EN 62013-1
BS 5990
BS EN 50324-2
BS EN 50305
BS 5991
BS EN 55022 2007
BS EN 60704-2-1
BS EN ISO 13903
BS EN 60793-1-30
BS EN 60793-1-31
BS EN 60793-1-32
BS EN 60793-1-33 2001
BS EN 60793-1-21
BS EN 60793-1-22
BS EN 60793-1-20
BS EN 13558
BS EN ISO 16330
BS EN 13559
BS EN ISO 15788-2
BS EN 1788
BS EN 60264-5-2 2001
BS EN 61290-10-1
BS EN 60461
BS 8451
BS EN 50326
BS EN 12312-14
BS EN ISO 13849-2
BS EN ISO 4033
BS EN ISO 4032
ISO15473
BS EN 14103
BS EN 61000-2-2
BS ISO 7004
BS ISO 17900
BS EN ISO 10692-1
BS EN 12617-3
BS EN 60704-2-4 2001
BS EN 13687-1
BS EN 13687-2
BS EN 13687-3
BS EN 10288
BS EN 13442
BS EN 61340-3-1 2002
BS EN 61340-3-2
PD IEC TS 62098 2000
BS EN 13446
BS EN 13647
BS EN 12808-2
BS EN 12808-3
BS EN 12808-4
BS EN 12808-5
BS EN 1097-10
BS EN 50334
BS EN 61512-2
BS EN 13653
BS EN 13624
BS ISO 8097
BS EN 13610
BS EN 13649
BS ISO 11338-2
BS 1384-2 2001
BS ISO 14243-1
BS EN 61978-1 2000
BS EN 13657
BS EN 13656
BS EN 13138-2
BS EN 12385-5
BS EN 12385-6
BS EN 12385-7
BS EN 12385-8
BS EN 12385-9
BS EN 10311
BS EN 12195-1
BS EN 12195-3
BS EN 12195-4
BS ISO 1837
04/30008013 DC 04/30008013 DC
BS ISO 10425
BS ISO 14242-1
BS EN 60601-1-1
BS ISO 17339
ISO5944
BS ISO 10727
BS EN 50377-3-1
BS 8409
BS ISO 18902
BS EN 61076-2-102
BS EN 60770-2
BS EN 61951-2 2001
BS EN 50134-1
BS EN 60793-1-50
BS EN 60793-1-53
BS EN 60793-1-51
BS EN 60793-1-52
BS EN 61951-1 2001
BS EN 61851-1 2001
BS EN 61851-22
BS ISO 15592-1
BS ISO 15592-2
PDIEC/TR61010-3-043
BS EN 61967-1 2002
BS ISO 492
BS ISO 16656
BS EN 61967-5
BS ISO 14807
BS ISO 2982-2
BS 8411
DD CEN/TS 14159
BS EN 61290-10-2
BS EN ISO 4027
BS EN 50311
BS EN 61290-5-3
BS EN 61121
BS EN 50132-5
BS EN 50132-4-1
BS ISO 15593
BS EN 61966-9 2000
BS EN 60191-6-8 2001
ISO/TR16060
BS EN 50201
BS EN 13683
BS EN 13534
BS EN 13677-1
ISO16586
BS EN 13677-2
BS ISO/IEC 15288
BS ISO/IEC 14598-6
BS EN 13677-3
BS ISO 17126
BS EN 13697
BS ISO 11318
BS EN 13640
BS EN 60947-5-6 1999
BS EN 13641
PD ISO/IEC TR 9126-2
PD ISO/IEC TR 9126-3
BS ISO/IEC 7813
BS EN 352-1
BS EN 352-2
BS EN 352-3
BS EN 352-6
BS EN 352-7
BS EN 13819-1
BS EN 13819-2
BS EN 458
ISO11992-2 Application
ISO11992-3 Application
BS EN 54-12
BS IEC 61501
ISO13855
ISO14120
BS EN ISO 15061 2001
BS EN 790
BS EN 50343
BS ISO 4709
BS EN 806-2
BS EN 54-13
BS EN ISO 1211 2001
BS IEC 62198
DD CEN/TS 54-14
BS EN 60512-23-4 2001
BS EN 12020-2
BS EN 10226-1
BS EN 60512-1 2001
BS EN 60512-1-100 2001
BS EN 10217-7
BS EN 1759-1
BS EN 10025-1
BS ISO 15738
BS EN 12952-15
BS EN 12953-11
BS EN 60454-3-16
BS EN 60554-2
BS EN 573-3
BS EN 573-4
BS ISO 8913
ISO15383
BS ISO 15202-2
WD/15759
BS 5628-3
BS ISO 16165
PD ISO/IEC Guide 67
DD CEN/TS 772-22
BS EN 10226-2
BS EN 485-3
BS EN 2435-005
BS EN 4508
BS EN 4588
BS ISO 10109-7
BS EN 1780-1
BS EN 1780-2
BS EN 1780-3
BS EN 13704
BS EN 60893-1
BS EN 60893-3-1
BS EN 60893-3-3
BS EN 60893-3-4
BS EN 60893-3-5
BS EN 60893-3-6
BS EN 60893-3-7
ISO15708-2 Examination practices
BS EN ISO 9606-2
BS EN ISO 15607
BS EN ISO 15609-1
BS EN ISO 15614-2
BS 5446-2
BS 5839-9
BS 6266
DD ENV 12836
BS EN 13705
BS EN 13693
ISO12494
BS EN 13711
BS EN 13708
BS EN ISO 3126
BS EN 13549
BS EN 13585
BS EN 13687-4
BS EN 13733
BS EN 13687-5
BS EN 61300-3-34 2001
BS EN 62005-3
BS EN 13726-1
BS EN 13726-2
BS 4875-1
BS ISO 14621-2
BS EN 13453-2
BS EN 13706-1
BS ISO 15213
BS 6279-2 2000
BS EN 60876-1 2001
BS EN 62077 2001
BS ISO 14997
PD CR 13714
BS ISO/IEC 19500-2
PD IEC TR 61000-5-6
BS ISO 8573-4
BS EN 50229
BS EN 13503-5
BS EN 13503-6
BS EN 13503-7
BS EN 13274-6
BS EN 379
BS ISO 12003-2
BS ISO 12003-1
BS ISO 18921
BS EN 50134-3
ISO17658
DD 252
BS IEC 60747-14-3 2001
BS EN 61754-15 1999
BS ISO 418
BS ISO 3627
BS ISO 3629
BS ISO 5990
BS ISO 17531
BS EN 50336
BS EN 61300-2-40
BS EN 60793-1-41
BS EN 60793-1-43 2001
BS EN 60793-1-44
BS EN 60793-1-45
BS EN 60793-1-46
BS ISO 15635
BS ISO 8349
BS EN 13706-2
BS ISO 16057
BS EN 12927-2
BS EN 12927-6
BS EN 13706-3
ISO7176-23 Requirements and test method for attendant-operated stair-climbing devices
BS EN ISO 16665 2005
BS EN ISO 5667-19 2004
BS EN ISO 17994 2004
BS ISO 16703
BS ISO 16000-3
BS ISO 16000-4
BS EN 13727
BS EN 13718-1
BS EN 13718-2
DD CLC/TS 50131-4
BS EN 14148
BS EN 13784
BS EN 13805
BS ISO 12141
BS 7991
BS EN 771-2
BS EN 771-4
BS EN 13751
BS EN ISO 13710
BS 4676
BS EN 13750
BS EN ISO 16140
BS EN 13740-2
BS EN 60512-1-1
BS EN 62018
BS EN 60512-1-2
BS EN 60512-2-1
BS EN 60512-2-2
BS EN 60512-2-3
BS EN 60512-2-5
BS EN 60512-2-6
BS EN 60512-3-1
BS EN 60512-4-1
BS EN 60512-4-2
BS EN 60512-4-3
BS EN 60512-5-1
BS EN 1943
BS EN 12390-3
BS EN ISO 16104
BS ISO 5833
BS EN 3475-408
BS ISO 16200-1
BS EN ISO 13969
BS ISO 14302
BS ISO 15592-3
BS EN 13891
BS EN 13394
BS EN 13393
BS EN 13246
BS ISO 9512
BS EN 13247
BS EN 13545
BS EN 12674-2
BS EN ISO 1302
BS EN 12810-2
BS EN 12811-1
BS EN 61290-3-2
BS EN 12811-2
BS EN 62005-2
BS ISO 3046-5
BS ISO 18925
BS EN 13743
BS ISO 17560
PD CR 13768
PD CR 13767 2001
BS EN ISO 8536-8
BS EN ISO 8536-9
BS EN ISO 8536-10
BS EN 13760
BS EN 10296-1
BS EN ISO 8536-11
BS EN 60684-3-340 to 342
BS EN 60684-3-343 to 345
DD IEC TS 62091
BS EN 60684-3-420 to 422
ISO17640
BS EN ISO 14587
ISO17638
ISO17636
ISO17639
ISO17635
ISO9015-2 Hardness test on arc welded joints
BS EN 13544-2
BS EN 13544-3
BS EN 13783
BS ISO/IEC 11694-3
ISO/IEC10021-1 System and Service Overview
BS EN 12780 2002
ISO/IEC10021-4 Abstract service definition and procedures
BS EN 13981-2
BS EN 10162
BS EN 60255-22-7
BS EN 576
BS EN 60335-2-88
BS EN ISO 6272-1 2004
BS EN 10080
DD CLC/TS 50131-2-6

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal

for ASTM Standards

Search & Listing Portal

for ISO Standards

Search & Listing Portal

for IEC Standards

Search & Listing Portal

for BSI Standards

Search & Listing Portal

for DIN Standards

Cheapest Original BSI Standards 2-80

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm

 

08/30179903 DC 08/30179903 DC. BS ISO 26322-2. Tractors for agriculture and forestry. Safety. Part 2. Narrow-track and small tractors
08/30179912 DC 08/30179912 DC. BS EN 60738-1 AMD1. Thermistors. Directly heated positive temperature coefficient. Part 1. Generic specification
08/30179917 DC 08/30179917 DC. BS EN 60940 AMD1. Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression
08/30179921 DC 08/30179921 DC. BS EN 61051-2 AMD1. Varistors for use in electronic equipment. Part 2. Sectional specification for surge suppression varistors
08/30179926 DC 08/30179926 DC. BS EN 60335-2-77. Safety of household and similar appliances. Part 2-77. Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
BS ISO 17615:2007 BS ISO 17615:2007. Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
08/30179965 DC 08/30179965 DC. BS EN 62453-1. Field device tool interface specification. Part 1. Overview and guidance
08/30179969 DC 08/30179969 DC. BS EN 62453-2. Field device tool interface specification. Part 2. Concepts and detailed description
08/30179973 DC 08/30179973 DC. BS EN 62453-301. Field device tool interface specification. Part 301. Communication profile integration
08/30179977 DC 08/30179977 DC. BS EN 62453-302. Field device tool interface specification. Part 302. Communication profile integration. IEC 61784 CPF 2
08/30179981 DC 08/30179981 DC. BS EN 62453-303-1. Field device tool interface specification. Part 303-1. Communication profile integration. IEC 61784 CP 3/1 and CP 3/2
08/30179985 DC 08/30179985 DC. BS EN 62453-303-2. Field device tool interface specification. Part 303-2. Communication profile integration
08/30179989 DC 08/30179989 DC. BS EN 62453-306. Field device tool interface specification. Part 306. Communication profile integration. IEC 61784 CPF6
08/30179993 DC 08/30179993 DC. BS EN 62453-309. Field device tool interface specification. Part 309. Communication profile integration. IEC 61784 CPF 9
08/30179997 DC 08/30179997 DC. BS EN 62453-315. Field device tool interface specification. Communication profile integration
08/30180001 DC 08/30180001 DC. BS EN 62453-41. Field device tool interface specification. Part 41. Object model integration profile. Common object model
08/30180005 DC 08/30180005 DC. BS EN 62453-501. Field device tool interface specification. Part 501. Communication implementation for common object model. IEC 61784 CPF 1
08/30180009 DC 08/30180009 DC. BS EN 62453-502. Field device tool interface specification. Communication implementation for common object model
08/30180013 DC 08/30180013 DC. BS EN 62453-503-1. Field device tool interface specification. Part 503-1. Communication implementation for common object model. IEC 61784 CP 3/1 and CP 3/2
08/30180017 DC 08/30180017 DC. BS EN 62453-503-2. Field device tool interface specification. Part 503-2. Communication implementation for common object model. IEC 61784 CP 3/4, CP 3/5 and CP 3/6
08/30180021 DC 08/30180021 DC. BS EN 62453-506. Field device tool interface specification. Communicatio n implementation for common object model
08/30180025 DC 08/30180025 DC. BS EN 62453-509. Field device tool interface specification. Part 509. Communication implementation for common object model. IEC 61784 CPF 9
08/30180029 DC 08/30180029 DC. BS EN 62453-515. Field device tool interface specification. Part 515. Communication implementation for common object model. IEC 61784 CPF 15
08/30180033 DC 08/30180033 DC. BS EN 62453-61. Field device tool interface specification. Device Type M anager (DTM) Styleguide for common object model
08/30180048 DC 08/30180048 DC. BS EN 61477 AMD3. Live working. Minimum requirements for the utilization of tools, devices and equipment
08/30180052 DC 08/30180052 DC. BS EN 50340 AMD1. Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV
08/30180068 DC 08/30180068 DC. BS ISO 6145-9. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 9. Saturation method
08/30180100 DC 08/30180100 DC. BS ISO/IEC 24765. Systems and software engineering vocabulary
08/30180103 DC 08/30180103 DC. BS EN 50136-1. Alarm systems. Alarm transmission systems. Part 1. General requirements for alarm transmission systems
08/30180111 DC 08/30180111 DC. BS EN ISO 17234. Leather. Chemical tests. Determination of certain azo colourants in dyed leathers
08/30180118 DC 08/30180118 DC. BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method
BS EN 13476-3:2007+A1:2009 BS EN 13476-3:2007+A1:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
08/30180159 DC 08/30180159 DC. BS ISO 11158. Lubricants, industrial oils and related products (class L) . Family H(hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
08/30180164 DC 08/30180164 DC. BS EN 62418. Metallization stress void test
08/30180170 DC 08/30180170 DC. BS ISO 13824. General principles on risk assessment of systems involving structures
08/30180227 DC 08/30180227 DC. BS EN ISO 3611. Geometrical product specifications (GPS). Dimensional measuring instruments. Micrometers for external measurements. Design and metrological characteristics
08/30180249 DC 08/30180249 DC. BS ISO 11107. Recreational diving services. Requirements for enriched air nitrox training programmes
08/30180252 DC 08/30180252 DC. BS ISO 11121. Recreational diving services. Requirements for introductory scuba experience programmes
BS ISO 16818:2008 BS ISO 16818:2008. Building environment design. Energy efficiency. Terminology
08/30180312 DC 08/30180312 DC. BS EN 50223. Stationary electrostatic application equipment for ignitable flock material. Safety requirements
ISO/TR25741 : 2008 EDTN1 ISO/TR25741 : 2008 EDTN1. ISO/TR 25741 Lifts and escalators subject to seismic conditions – Compilation report
08/30180328 DC 08/30180328 DC. BS EN 61800-8. Adjustable speed electrical power drive systems. Part 8. Specification of voltage on the power interface
BS EN 62320-1:2007+A1:2009 BS EN 62320-1:2007+A1:2009. Maritime navigation and radiocommunication equipment and systems. Automatic identification systems (AIS). AIS base stations. Minimum operational and performance requirements, methods of testing and required test results
08/30180358 DC 08/30180358 DC. BS EN ISO 30024. Animal feeding stuffs. Determination of phytase activity
08/30180406 DC 08/30180406 DC. BS ISO 15487 AMD1. Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying
08/30180417 DC 08/30180417 DC. BS EN 61300-2-23. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-23. Tests. Sealing for non-pressurized closures of fibre optic devices
08/30180423 DC 08/30180423 DC. BS ISO 26323. Milk products. Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH)
08/30180426 DC 08/30180426 DC. BS EN 62343-3-1. Dynamic modules. Performance specification templates. Part 3-1. Dynamic channel equalizers
08/30180433 DC 08/30180433 DC. BS EN 61280-2-1. Fibre optic communication subsystem basic test procedures. Part 2-1. Test procedures for digital systems. Receiver sensitivity and overload measurement
08/30180437 DC 08/30180437 DC. BS EN ISO 3386-1 AMD1. Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression. Part 1. Low-density materials
08/30180441 DC 08/30180441 DC. BS EN ISO 3386-2 AMD1. Flexible cellular polymeric materials. Determination of stress-strain characteristics in compression. Part 2. High-density materials
08/30180545 DC 08/30180545 DC. BS EN 62264-5. Enterprise system integration. Part 5. Business to manufacturing transactions
08/30180579 DC 08/30180579 DC. BS ISO/IEC 15419. Information technology. Automatic identification and data capture techniques. Bar code digital imaging and printing performance testing
08/30180592 DC 08/30180592 DC. BS EN 61029-1 AMD. Safety of transportable motor-operated electric tools. Part 1. General requirements
08/30180595 DC 08/30180595 DC. BS EN 60745-1 AMD. Hand-held motor-operated electric tools. Safety. Part 1. General requirements
08/30180611 DC 08/30180611 DC. BS ISO/IEC 12139-1. Information technology. Telecommunication and information exchange between systems. Power line communication (PLC). High speed PLC medium access control (MAC) and physical layer (PHY). Part 1. General requirements
08/30180625 DC 08/30180625 DC. BS ISO 11649. Financial services. Core banking. Structured creditor reference to remittance information
08/30180643 DC 08/30180643 DC. BS ISO 15869. Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks
08/30180656 DC 08/30180656 DC. BS ISO 7768 AMD1. Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
BS EN ISO 14978:2006 BS EN ISO 14978:2006. Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
08/30180662 DC 08/30180662 DC. BS ISO 7769 AMD1. Textiles. Test method for assessing the appearance of creases in fabrics after cleansing
08/30180703 DC 08/30180703 DC. BS EN 60754-1. Test on gases evolved during combustion of materials from cables. Part 1. Determination of the halogen acid gas content
08/30180711 DC 08/30180711 DC. BS EN 60754-2. Test on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
08/30180761 DC 08/30180761 DC. BS EN 4655. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars a or D ≤ 200 mm. Rm ≥ 1400 MPa
08/30180770 DC 08/30180770 DC. BS EN 50164-3 AMD1. Lightning Protection Components (LPC). Part 3. Requirements for isolating spark gaps
ISO/IEC8825-6 : 2008 EDTN1 ISO/IEC8825-6 : 2008 EDTN1. ISO/IEC8825-6 : 2008 Information technology. ASN.1 encoding rules: Registration and application of PER encoding instructions
08/30180900 DC 08/30180900 DC. BS EN 60205 AMD1. Calculation of the effective parameters of magnetic piece parts
BS ISO 18283:2006 BS ISO 18283:2006. Hard coal and coke. Manual sampling
KIT 199 KIT 199. TickIT Guide (Issue 5.5) Combi-Kit 199. CD-ROM and A4 Paperback
DC08/30180952 DC08/30180952. BS EN ISO 14713-2. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Zinc coatings. Part 2. Hot dip galvanizing
08/30180960 DC 08/30180960 DC. BS ISO/IEC 11989. Information technology. iSCSI Management API
08/30180966 DC 08/30180966 DC. BS EN 50160. Voltage characteristics of electricity supplied by public distribution networks
08/30180969 DC 08/30180969 DC. BS EN 1570. Safety requirements for lifting tables
08/30180978 DC 08/30180978 DC. BS ISO 27956. Road vehicles. Securing of cargo in delivery vans. Requirements and test methods
08/30181001 DC 08/30181001 DC. BS EN 50512. Electrical installations for lighting and beaconing of aerodromes. Advanced Visual Docking Guidance Systems (A-VDGS)
ISO/IEC10995 : 2008 EDTN1 ISO/IEC10995 : 2008 EDTN1. ISO/IEC10995 : 2008 Information technology. Digitally recorded media for information interchange and storage. Test method for the estimation of the archival lifetime of optical media
ISO/IEC14476-5 : 2008 EDTN1 ISO/IEC14476-5 : 2008 EDTN1. ISO/IEC 14476-5 Information technology – Enhanced communications transport protocol. Part 5: Specification of N-plex multicast transport
08/30181037 DC 08/30181037 DC. BS EN 4656. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. A or D ≤ 200 mm. Rm ≥ 1520 Mpa
08/30181052 DC 08/30181052 DC. BS EN 4657. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. A or D ≤ 200 mm. Rm ≥ 1650 MPa
08/30181055 DC 08/30181055 DC. BS EN 4658. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. A or D ≤ 200 mm. Rm ≥ 1520 MPa
08/30181058 DC 08/30181058 DC. BS EN ISO 28927-5. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 5. Drills and impact drills
08/30181062 DC 08/30181062 DC. BS EN 4659. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. A or D ≤ 200 mm. Rm ≥ 1650 MPa
08/30181065 DC 08/30181065 DC. BS EN 4670. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. A or D ≤ 300 mm
08/30181068 DC 08/30181068 DC. BS EN ISO 28927-6. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 6. Rammers
08/30181072 DC 08/30181072 DC. BS EN ISO 28927-7. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 7. Nibblers and shears
08/30181082 DC 08/30181082 DC. BS EN ISO 28927-8. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 8. Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action
08/30181096 DC 08/30181096 DC. BS EN ISO 28927-9. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 9. Scaling hammers and needle scalers
08/30181106 DC 08/30181106 DC. BS EN 4671. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1400 MPa
08/30181131 DC 08/30181131 DC. BS EN 55011 AMD. Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
08/30181155 DC 08/30181155 DC. BS EN 4672. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm
08/30181164 DC 08/30181164 DC. BS ISO 9867 AMD1. Textiles. Evaluation of the wrinkle recovery of fabrics. Appearance method
08/30181175 DC 08/30181175 DC. BS ISO 22089. Aerospace. Hydraulic power transfer units. General specifications
08/30181258 DC 08/30181258 DC. BS EN 14229. Structural timber. Wood poles for overhead lines
CWA 15740:2008 CWA 15740:2008. Risk-based inspection and maintenance procedures for European industry (RIMAP)
08/30181295 DC 08/30181295 DC. BS ISO 5631-1. Paper and board. Determination of colour by diffuse reflectance. Part 1. Indoor daylight conditions (C/2°)
08/30181385 DC 08/30181385 DC. BS EN ISO 6721-1 AMD1. Plastics. Determination of dynamic mechanical properties. Part 1. General principles
08/30181476 DC 08/30181476 DC. BS EN ISO 10717. Footwear. Test method for slide fasteners. Burst strength
08/30181486 DC 08/30181486 DC. BS EN ISO 10768. Footwear. Test method for the determination of the resistance of elastics for footwear to repeated extension. Fatigue resistance
08/30181490 DC 08/30181490 DC. BS EN ISO 10750. Footwear. Test method for slide fasteners. Attachment strength of end stops
08/30181494 DC 08/30181494 DC. BS EN ISO 20869. Footwear. Test methods for outsoles, insoles, lining and insocks. Water soluble content
08/30181498 DC 08/30181498 DC. BS EN 61000-5-8. Electromagnetic compatibility (EMC). Part 5-8. Installation and mitigation guidelines. HEMP protection methods for the distributed infrastructure
08/30181526 DC 08/30181526 DC. BS EN ISO 15747. Plastic containers for intravenous injections
BS 25999-1:2006 (Spanish) (Paperback) BS 25999-1:2006 (Spanish) (Paperback). BS 25999-1:2006 Business continuity management . Code of practice
08/30181604 DC 08/30181604 DC. BS EN ISO 10781. Health informatics. HL7 Electronic health record system functional model, release 1
BS EN 60079-6:2007 BS EN 60079-6:2007. Explosive atmospheres. Equipment protected by oil immersion "o"
08/30181628 DC 08/30181628 DC. BS ISO/IEC 15423. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS EN 14958:2006+A1:2009 BS EN 14958:2006+A1:2009. Food processing machinery. Machinery for grinding and processing flour and semolina. Safety and hygiene requirements
08/30181828 DC 08/30181828 DC. BS 5979. Code of practice for the planning, design, setting up and use of temporarily installed suspended access equipment
08/30181853 DC 08/30181853 DC. BS EN ISO 10734. Footwear. Test method for slide fasteners. Strength of slide fastener pullers

Cheapest Original BSI Standards 2-15000

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal

for ASTM Standards

Search & Listing Portal

for ISO Standards

Search & Listing Portal

for IEC Standards

Search & Listing Portal

for BSI Standards

Search & Listing Portal

for DIN Standards

BS EN 14497
BS EN 14498
BS EN 1092-1
BS EN ISO 15614-13
ISO9328-7 Stainless steels
BS EN 14505
BS EN 60404-14
BS EN ISO 15630-1
BS EN 61518 2001
CWA 14523
CWA 14243
CWA 14355
CWA 14515
PAS 56
BS ISO/IEC 18045
BS ISO/IEC 15504-1
BS ISO/IEC 15504-5
BS EN 545
PAS 1188-2
BS EN ISO 11138-1
BS EN ISO 11138-2
BS EN ISO 11138-3
BS EN ISO 11138-4
BS EN ISO 11138-5
BS EN ISO 15630-3
BS EN ISO 4165
BS EN 14486 2005
BS EN 14503
BS CEN/TS 1793-5
BS ISO 7663
BS EN 13084-4
BS EN 1004
BS IEC 60568
BS EN 13894-2
BS EN 12811-3
BS EN 61442
BS ISO 21006
PD ISO/IEC Guide 73
ISO/ASTM51400
ISO/ASTM51631
EP 203 EP 203
BS ISO 762
BS EN 14510
BS EN 13263-1
BS EN 13263-2
BS EN 523
BS ISO 13473-2
BS EN 1332-5
BS ISO 13473-3
BS EN 60909-0 2001
BS EN 61340-2-1
BS ISO/IEC 80416-4
BS EN 13114
BS EN 13113
BS EN 13112
BS EN 60079-10
ISO11142
PD ISO/PAS 16917
EP 201 EP 201
BS ISO 15850
EP 526 EP 526
PD ISO/TR 9824
BS ISO 7132 2003
BS EN 62272-1
DD IEC/PAS 62338
BS EN 61988-2-1
ISO/IEC9995-7 Symbols used to represent functions
BS EN 61788-10
BS EN 61788-12
BS EN 13347
BS ISO 16063-12
BS EN 14484
BS EN 14485
BS EN 60974-10 2002
BS EN 10246-7
BS ISO 1540
BS EN ISO 20645
BS EN 13673-1
BS EN 13673-2
BS EN 1071-3
BS EN 1071-4
BS EN 13900-4
BS ISO/IEC 25000
BS ISO/TS 16922
BS EN 55016-1-2
BS EN 61287-1
BS EN 60730-2-19 2008
BS EN ISO 15187
BS ISO 11600
BS ISO 8601
BS EN 13248
BS EN 60335-2-56
BS EN 61400-12-1
BS EN 60335-2-14
BS EN 1991-1-4
BS EN 60871-1
BS ISO 17804
BS EN 2995-001
BS 5726
BS EN 61300-3-32
PD CEN/TR 15310-5
BS EN 60947-6-1
BS ISO 10119
DD ENV 14232
BS ISO 6518-1
BS EN ISO 12215-3
BS ISO 13583-2
BS EN 62301
BS EN 60704-2-9
BS EN 60335-2-27
BS EN 363
BS EN 2995-004
02/710748 DC 02/710748 DC
BS EN 2995-005
BS EN 61755-2-1
BS EN 61755-2-2
BS EN ISO 6271-1 2004
BS EN 61883-6
BS EN ISO 6271-2 2004
HB 10213
HB 10214
BS EN 50380
BS EN 61000-4-1
BS ISO 18114
BS EN ISO 12215-2
BS ISO 20341
BS 8426
BS EN 14518
ISO9005
BS EN 13130-1
BS EN ISO 5403
BS EN 60993
BS 2X 35
BS ISO 5008
BS EN 14514
BS EN ISO 10563
BS EN 13130-2
BS EN 13130-3
BS EN 13130-4
BS EN 13130-5
BS EN 4008-011
BS EN 13130-6
BS EN 13130-7
BS EN 13130-8
BS EN 4008-012
BS EN ISO 10590
BS 3084
BS ISO 6107-2 2006
BS ISO 6107-7 2006
BS EN ISO 14630
BS ISO 6107-1 2004
BS ISO 6107-5 2004
ISO23611-1 Hand-sorting and formalin extraction of earthworms
BS EN 13108-8
BS ISO 5681
BS ISO 6107-6 2004
BS EN 13724
BS ISO 9903-1
ISO23753-1 Method using triphenyltetrazolium chloride (TTC)
BS ISO 9903-2
BS ISO/IEC TR 14516
BS ISO/IEC 13568
BS ISO 11096
BS EN ISO 11432
BS EN ISO 5764
BS EN 61400-1
BS EN ISO 16484-5
BS EN 60774-4
BS EN 4179
BS EN ISO 10497
BS EN ISO 1806
BS ISO 15644
BS ISO 15645
BS 5499 CD-ROM BS 5499 CD-ROM
KIT 106 KIT 106
BS ISO 15643
BS EN 14522
BS ISO 14277
BS EN 2996-001
BS EN 2996-004
BS EN 2996-005
BS EN 3661-001
BS EN 3661-005
BS EN 3725
BS ISO 513
BS EN 3662-001
BS EN 3662-005
BS EN 3662-006
BS ISO 16462
BS EN 14521
BS EN 61241-0
BS EN 61241-10
BS EN 61241-14
BS EN 61241-17
BS EN 60974-2
PD IEC TR 60695-7-2
BS EN ISO 7840
BS ISO 6489-3
BS EN 993-15
BS M 93
BS ISO 16463
BS EN 60085
ISO6577
ISO/TS20825
BS EN 14504
BS EN 14580
BS EN ISO 15616-3
BS EN ISO 15616-2
BS EN ISO 15616-1
BS ISO 4179
PD IEC/TR 62066
DD CEN ISO/TS 17262
BS EN ISO 14906
PD ISO/TR 12036
BS ISO 8995
BS 7901
BS EN 61010-2-101
BS EN 12860
BS IEC 62233
BS EN 50389
BS EN 50390
DD CEN ISO/TS 17263
BS EN 62258-2
BS EN 60749-24
BS ISO 277
BS ISO 276
BS EN 60749-34
BS EN 61935-1
03/115519 DC 03/115519 DC
BS EN 13382
DD ISO/TS 11725
DD CEN ISO/TS 22476-11
BS EN 12441-4
BS EN 12441-5
BS EN 12441-6
BS EN 993-18
BS EN 12373-17
BS EN 12373-19
BS EN 13617-4
BS EN 12373-18
BS EN 50401
BS EN 50400
BS EN ISO 4630-1 2004
BS EN ISO 4630-2 2004
BS EN 12170
BS EN 12171
BS ISO 17422
BS ISO 4149
BS ISO 10470
BS ISO 5507
BS ISO 11814
BS ISO/IEC 9945-2
BS EN 60603-7-4
BS EN 60255-26
BS ISO/IEC 9945-3
BS EN 61290-5-2
BS ISO/IEC 9945-4
BS EN 62148-3
BS EN 62148-4
04/30080013 DC 04/30080013 DC
BS EN 62149-3
BS EN 61300-2-1
BS ISO 16134
BS EN 60335-2-26
BS EN 60335-2-28
BS EN 62149-1
BS EN 61300-2-5
BS EN 61300-2-17
BS EN 60598-2-11
BS EN 61300-3-6
BS EN 61300-3-16
BS EN 61300-3-26
BS ISO 12988-2
BS EN ISO 13428
PD CEN/TR 14548
BS ISO 6605
DD ENV 13999-2
DD ENV 13999-3
DD ENV 13999-4
BS X 38
BS EN 13674-4
BS EN 13674-2
BS EN 13674-3
BS EN ISO 12215-4
BS EN 60934
BS EN 50164-3
BS 6001-0 2006
05/30080462 DC 05/30080462 DC
BS ISO 23470
BS EN 13564-2
BS EN 12953-8
BS EN 60044-8
BS ISO 15390
BS ISO 3977-7
BS ISO 3977-8
BS EN 62289
BS EN 60335-2-32
BS EN ISO 13503-2
ISO15296
BS ISO 22368-1
BS ISO 22368-2
BS ISO 6746-1 2003
BS ISO 6746-2 2003
BS ISO 22368-3
BS ISO 500-2
BS ISO 500-1
BS 6660-1
BS ISO 500-3
BS EN 62194
BS EN 60794-2-10
BS EN 60794-2-20
BS EN 60794-2-30
BS EN 61746
BS 8439
BS ISO 15009
BS EN ISO 12217-1
BS EN 14525
BS EN 10028-5
BS EN 10028-6
BS EN ISO 6848
BS ISO 13318-1
BS ISO 13318-2
BS EN ISO 8987
BS EN 14524
BS EN 14526
BS EN 13352
BS EN ISO 1119
BS 4751
BS EN ISO 11140-1
BS EN ISO 4516
BS EN 61753-053-3
BS EN ISO 9994
BS EN ISO 14534
BS EN ISO 12217-2
BS EN 13360
DC02/563429 (BLACK AND WHITE) DC02/563429 (BLACK AND WHITE)
WD/AMD14071 (CORR TO BSEN1870-2 Horizontal beam panel saws and ve
BS EN 60793-2-10
BS EN 60793-1-49
BS EN ISO 10535
ISO15712-1 Airbour
ISO15712-2 Impact s
ISO15712-3 Airbourn
ISO15712-4 Transmiss
BS EN ISO 140-16
BS EN ISO 140-18
BS EN 1062-1
BS EN 1062-7
BS EN ISO 6360-7
BS ISO 6489-1
BS ISO 11783-9
BSEN62079
BS EN ISO 2063
BS ISO 10414-2
CWA 14536
BS EN 4610
BS ISO 13628-5
WD/ISO11737-3 Guidance on evaluation and interpretation of bioburden data
BS EN ISO 11137-3
BS ISO 23794
BS ISO 289-4
BS EN 60357
BS EN ISO 14825
ISO/IEC15938-3 AMD1(08/04)CD-ROM ISO/IEC15938-3 AMD1(08/04)CD-ROM
BS EN 13373
BS EN ISO 4624 2003
BS EN 1468
BS EN 13844
BS ISO/IEC 13335-1
BS ISO 21807
BS EN 580
BS EN 1467
BS ISO 5739
BS ISO 12653-2
BS EN 13067
BS EN 60335-2-95
BS EN 60335-2-82
BS EN 60335-2-55
BS EN 60335-2-52
BS EN 60335-2-51
BS 61535
BS 5839-6
BS ISO 8579-1
PD IEC TR 60909-1
BS EN 60966-2-1
BS EN 60966-2-2
BS EN 60966-2-3
BS EN 60966-3
BS EN 60966-3-1
BS EN 60966-3-2
BS EN 60966-4
BS EN 60966-4-1
ISO21028-1 Temperatures below -80°C
ISO21028-2 Temperatures between -80°C and -20°C
BS EN 61703
BS 6501-1
PD IEC TR 62271-308
BS EN 60122-1
BS EN 60335-2-92
BS EN 61076-1
BS EN 61857-22
BS EN 60335-2-41
BS EN 13498
BS EN 13494
BS EN 13495
BS EN 13496
BS EN 13497
BS EN 50264-1
BS EN 61754-3
BS EN 50264-2
BS EN 50264-3
BS 903-4
BS ISO 10110-17
BS 6635
BS EN 12464-1
BS EN ISO 15148
ISO/IEC13239
BS EN 13756
BS ISO 15836
BS IEC 60748-1
BS EN 1622
BS EN 779
BS ISO 6162-2
BS EN 10276-2
BS EN 14530
BS EN ISO 11199-3
BS EN 1514-8
BS EN 980
BS EN ISO 9562
BS EN 13363-2
BS EN ISO 14408
BS EN 45510-2-5
BS EN 45510-2-7
BS ISO/IEC 19763-1
BS EN 60745-2-15
BS EN ISO 2560
BS ISO/IEC19763-3
BS EN 60974-7
BS 5760-4
DD ENV 1006
KIT 108 KIT 108
KIT 109 KIT 109
BS EN 60958-1
DD IEC TS 60695-11-4
DD IEC TS 60695-11-3
BS EN 60695-4
BS EN ISO 734-1
BS 5163-1
BS IEC 60853-3
BS EN 924
BS 6043-3
BS EN ISO 9093-2
BS EN 50288-4-2
BS EN 50288-6-1
BS EN 50288-6-2
BS EN 50288-5-2
BS EN 50288-1
BS EN 50288-2-1
BS EN 50288-2-2
BS EN 50288-3-1
BS EN 50288-5-1
BS EN 50288-3-2
BS EN 50288-4-1
BS EN 50289-4-14
BS EN 60939-2-1
BS EN 60939-2-2
BS EN 1300
BS EN 62319-1
BS EN 62319-1-1
BS ISO 7041
BS EN ISO 10426-4
BS EN 14532-2
BS EN 13479
BS EN ISO 10427-2
ISO/IECTR14543-4 Home and building automation in a mixe
WD/ISO/IEC9594-7 Selected object classes
BS EN ISO 17652-1
BS EN 4560
BS ISO 12616
DD ENV 14186
BS CECC 96701
DD IEC TS 60695-11-40
BS EN 13463-6
BS EN 13752
BS EN 13753
BS EN 13754
BS EN 13463-3
BS ISO 16642
BS ISO 1087-1
DD CLC/TS 50131-2-4
BS EN 60695-7-1
DD IEC TS 60695-7-3
BS EN ISO 9409-2
BS EN 50355
BS ISO/IEC 14662
BS ISO/IEC 15944-2
DD CLC/TS 50131-2-3
BS ISO/IEC 18033-4
DD CLC/TS 50131-2-5
DD CLC/TS 50131-3
BS EN 12237
ISO/IEC11179-3 Registry metamodel and basic attributes
BS EN 12697-8
ISO/IEC11179-4 Formulation of data definitions
BS 7121-1
BS EN 10163-2
BS EN 10163-3
BS EN 10164
BS EN 13232-4
BS EN 12697-15
ISO1083
ISO/TS17120
BS EN ISO 10434
ISO/IEC11179-1 Framework
ISO/IEC11179-6 Registration
BS ISO 10381-2
ISO/IECTR20943-3 Value domains
BS ISO 4190-1
BS EN 12697-36
ISO20421-2 Operational requirements
ISO21009-2
BS EN 13036-3
ISO21029-2 Operational requirements
BS ISO 21010
BS EN 13036-4
BS EN 13036-7
BS EN 1344
BS EN 459-1
BS EN 459-2
BS EN ISO 2535
BS ISO 12199
BS ISO 21270
BS ISO 16362
BS ISO/IEC 13249-1
06/30082717 DC 06/30082717 DC
BS ISO/IEC 13249-3
BS ISO/IEC 13249-6
WD/BSEN60216-3
WD/BSEN60216-3
BS ISO 15872
BS 8000-9
BS ISO 12192
ISO/IEC18035
BS EN ISO 8254-2
BS EN 12281
BS EN 61753-021-2
BS EN 61960-2 2001
BS EN 60749-13
BS EN 60749-10
BS EN 12283
BS EN 60749-7
BS EN 60749-3
ISO17356-1 General structure and terms, definitions and abbreviat
BS EN 61800-4
BS ISO 2351-1
BS ISO 2351-2
BS ISO 2351-3
BS EN 1010-1
BS EN 1010-2
BS EN 1010-4
BS EN 60455-3-5
BS ISO/IEC 15944-1
BS EN 60454-3-12
DD IEC/PAS 61280-2-10
PD CR 12471
BS EN ISO 9342-2
DD CEN/TS 13244-7
BS EN ISO 19011
BS ISO 20683-2
BS EN 10301
WD/ISO/IEC21000-8 Reference Software
ISO/IEC21000-9 File format
BS EN 14528
BS EN 415-5
BS EN 12094-13
02/211631 DC 02/211631 DC
BS EN 61988-3-1
DD CEN/TS 14541
BS ISO 13323-1
BS ISO 24347
BS ISO 15105-1
BS EN 14538 2006
BS EN 1179
BS ISO 21107
ISO/IEC21992
ISO/TS21091
BS EN 13717
BS EN 13405
BS EN 13926
PD ISO/TR 16056-1
PD ISO/TR 16056-2
ISO/TS16058
KIT 107 KIT 107
BS 8888
BS EN 14944-1
BS EN 14207 2002
PD IEC TR 62225
02/106054 DC 02/106054 DC
ISO24135-1
BS ISO 11418-1
BS ISO 11418-2
BS ISO 11418-3
BS ISO 11418-4
BS EN 10318
BS EN 60335-2-95
BS ISO 6967
BS ISO 6968
PD ISO/TR 18307
BS ISO 14168
DD ISO/TS 13762
BS EN ISO 13787
BS EN 50266-2-1
BS EN 50266-2-2
BS EN ISO 10684
BS EN 50266-2-3
BS EN 50266-2-4
BS EN 50266-2-5
BS EN 60512-14-6
BS EN 60512-14-5
BS EN 60512-14-4
BS EN 13330
BS EN 60512-14-2
BS EN 50377-2-1
BS EN 10169-3
BS 7919
BS 2B 29
BS 2B 30
05/30083471 DC 05/30083471 DC
BS 2B 31
BS 2B 32
ISO8764-1 Driver tips
ISO8764-2 General requirements, lengths of blades and
BS EN 60335-2-16
BS EN 60335-2-80
BS EN 60512-12-1
BS ISO 15632
BS EN ISO 10993-17
02/208757 DC 02/208757 DC
02/208756 DC 02/208756 DC
BS EN 61006
ISO/IEC14776-321 Block commands (SBC)
ISO/IEC2375
BS EN ISO 5826
BS EN 13152
BS EN 13153
04/30083672 DC 04/30083672 DC
BS EN 13893
KIT 110 KIT 110
KIT 111 KIT 111
HB 10218
PD CEN/TR 14549
BS ISO 1458
ENISO9514 (ISO9514
BS EN ISO 9514
BS 1892-4
BS EN ISO 10303-210
CWA 14590
DD ENV 13730-2
BS EN ISO 4628-8 2005
ISO2380-1 Tips for hand- and machine-operated scre
ISO2380-2 General requirements, lengths of blades and markin
BS EN 50090-2-3
KIT 112 KIT 112
KIT 113 KIT 113
KIT 114 KIT 114
PAS 40
BS EN 61300-3-20 2001
BS EN ISO 15785
BS EN 314-1
BS EN ISO 9455-16
BS ISO 1456
BS EN 13619
BS EN 1614
PD IEC/TR 62349
BS EN 12052
BS EN 14067-1
BS EN 14067-2
BS EN 12381
KIT 115 KIT 115
BS EN 14067-3
BS EN 12435
DD CEN/TS 14442
DD CEN/TS 14482
DD CEN/TS 15211
DD CEN/TS 14463
BS EN 12264
BS EN 1068
BS EN 13606-1
BS EN 13606-4
BS EN 13232-1
BS EN 13232-2
BS ISO 5718
BS EN 13403
BS EN 12854
BS EN ISO 14310
BS EN 60695-11-5
BS EN ISO 9785
BS ISO/IEC TR 14143-4
BS EN 12966-1
BS EN 61754-23
BS EN 12966-2
BS EN 12966-3
BS ISO 12171
WD/PD5500
BS EN 12806
02/209644 DC 02/209644 DC
BS EN 14188-2
BS EN 13566-3
BS EN 13566-1
BS EN 13566-4
BS EN 12629-2
BS EN 14493
BS EN 12629-3
BS EN 12629-8
BS EN 14582
BSENISO7823-1 Cast sheets
ISO/TR17119
BS EN ISO 11073-10101
BS EN ISO 11073-10201
BS EN ISO 11073-20101
BS EN 1966
BS EN ISO 11254-2
BS EN 13232-5
BS EN 13232-6
BS EN 1649
BS EN 13232-3
BS ISO/IEC 18000-1
BS ISO/IEC 18000-2
BS ISO/IEC 18000-3
BS ISO/IEC 18000-4
BS EN ISO 11073-30300
BS EN ISO 11073-30200
ISO/TR21089
BS ISO 4689-2
BS ISO 4689-3
BS EN ISO 18104
BS ISO 20302
DD CEN/TS 12200-2
BS EN 14822-1
BS EN 14822-2
BS EN 14822-3
DD CEN/TS 14796
BS EN 14574
BS EN 14575
BS EN 14576
BS EN 14583
BS EN ISO 1346
BS EN ISO 9554
BS EN ISO 2307
BS EN 14382
BS EN 13274-8
BS EN ISO 8692 2004
BS EN ISO 14723
BS EN ISO 1141
BS EN 14104
BS EN ISO 1181
BS EN ISO 13696
BS EN ISO 1140
BS EN 14105
BS EN ISO 15103-1
BS EN ISO 15103-2
BS EN ISO 15526-1
BS EN ISO 10427-1
BS EN ISO 15526-2
BS EN 14107
BS EN 14108
BS EN 14109
BS EN ISO 16070
BS EN 14110
BS EN ISO 10440-2
BS EN 14111
BS EN ISO 1624
BS EN 14112
ISO15623
BS EN 4047
BS EN 916
BS ISO 10540-1
BS ISO 10540-2
ISO11451-2 Off-vehic
BS EN ISO 11431
BS EN ISO 376
DD CEN/TS 14537
DUPLICATE RECORD DUPLICATE RECORD
BS EN ISO 15254
BS EN ISO 4142
BS EN ISO 8205-2
DD ISO/TS 17090-1
DD ISO/TS 17090-2
DD ISO/TS 17090-3
BS EN 12098-4
BS EN 14546
BS EN 14569
BS EN 1731
BS EN 10049
BS EN ISO 15245-1
BS EN ISO 14956
BS EN ISO 13631
BS EN ISO 13705
BS EN ISO 105-X12
BS EN 13286-43
BS EN ISO 9094-1
BS EN ISO 15874-3
BS EN ISO 15874-5
DD CEN/TS 1456-2
BS EN ISO 12402-7
BS 8800
BS EN 13285
BS EN ISO 12402-10
BS EN 13286-1
BS EN 14468-1
BS EN 14468-2
DD CEN/TS 14577
BS EN 13286-2
BS EN 13286-3
PD CEN/TR 14568
ISO4435
BS EN 13286-4
BS ISO 15767
BS EN 13286-5
BS ISO 21537-1
BS ISO 21537-2
BS ISO 21538
PD CEN ISO/TR 15608
WD/ISO/IEC21827
BS EN 14585-1
BS EN 14185-1
BS EN ISO 11810-2
BS ISO 15517
BS EN 13305
BS EN 13304
ISO13584-102
ISO22478
BS EN ISO 15841
BS EN 60627 2001
BS EN 764-5
BS ISO 13299
ISO4991
BS EN ISO 24234
BS ISO 19960
BS EN 13975
BS EN 764-4
BS 1339-1
BS EN 14056
BS EN ISO 7886-4
BS ISO 4046-1
BS ISO 4046-2
BS ISO 4046-3
BS ISO 4046-4
BS ISO 4046-5
BS EN 61249-2-23
BS EN 61249-2-26
KIT 116 KIT 116
BS EN 12291
BS EN ISO 11810
BS EN 60974-12
BS 8435
BS ISO 7176-3
BS EN 14085
BS S 164
DD ISO/PAS 11856
ISO10355
BS EN 13100-2
DD CEN/TS 14578
BS EN 61947-1
BS EN 13689
BS ISO 10086-2
BS EN 13877-3
ISO15873
BS EN 13244-5
BS EN 13244-4
BS EN 13244-3
BS EN 13244-2
BS EN 13244-1
BS EN ISO 15854
DD CEN/TS 14038-1
BS EN ISO 15912
BS EN ISO 22112
BS EN ISO 15875-3
BS EN ISO 15875-5
DD CEN ISO/TS 15875-7
BS ISO 14303
BS EN 957-10
BS EN 12355
BS EN 1509
BS EN 1510
BS EN ISO 15876-3
BS EN ISO 15876-5
DD CEN ISO/TS 15876-7
BS EN ISO 15106-1
DD CEN ISO/TS 15877-7
BS EN ISO 15877-5
BS EN ISO 15877-3
BS EN ISO 15877-2
BS EN ISO 15106-2
BS EN ISO 15877-1
BS EN ISO 21351
BS EN ISO 1530
BS ISO 18185-1
BS ISO 10381-1
BS EN 14811
BS EN 13232-7
BS EN 13232-8
BS EN 13232-9
BS EN ISO 15106-3
BS EN 13314
BS EN 957-2
BS EN 12196
BS EN 165
BS EN 13231-1
BS EN 13231-2
BS EN ISO 6529
BS ISO 14490-1
BS ISO 14490-5
BS ISO 14490-6
BS ISO 14490-7
BS ISO 2424
BSENISO10303-210
BSENISO10303-210
ISO4118
BS 6001-7 2006
BS EN ISO 21569
BS EN ISO 21571
ISO/IEC15444-8 Secure JPEG 2000
ISO/IEC15444-9 Interactivity tools , APIs and protocols
BS EN 15204
ISO/IEC15444-11
BS EN 14581
BS EN 12274-4
BS EN 12272-3
BS EN 14579
BS EN 12274-2
BS 3985
BS EN 13489
BS ISO 5667-5
BS EN 13488
BS EN 15115
PD 0005
PD 0015
BS EN 12978
KIT 32 KIT 32
PD 0020
BS 1703
BS EN 658-5
BS EN 13775-1
BS EN 13775-2
BS EN 13775-3
BS EN 820-1
BS EN ISO 19011
BS EN 60352-7
BS EN ISO 16672
BS EN 61810-2
BS 5422
OHS BOXED SET OHS BOXED SET
ISM BOXED SET ISM BOXED SET
EMS BOXED SET EMS BOXED SET
BS EN 1007-3
BS EN 13452-1
BS EN 13452-2
BS EN 658-2
BS EN 12267
BS EN 12268
BS EN 50386
BS EN 13278
PD 3001
PD 3002
PD 3003
PD 3004
BS EN 14702-2
BS EN 1277
BS EN 10169-1
BS EN 13900-1
BS EN 13900-2
BS EN 13900-3
BS ISO 15375
04/30086336 DC 04/30086336 DC
ISO8871-5 Functional requirements and testing
BS ISO 11900-3
BS EN ISO 294-3
BS 7870-3
BS EN ISO 13849-1
BS ISO 2909 2002
ISO/TR19358
BS ISO 22866
ISO9409-1 Plates
BS EN ISO 9409-1
02/124268 DC 02/124268 DC
BS EN 13384-2
BS 8433
ISO23753-2 Method using iodotetrazolium chloride
ISO15952
BS EN 13597
BS EN ISO 13625
DD ISO/PAS 18152
DD ISO/TS 17450-2
BS 6200-3
BS EN ISO 15546
BS ISO 10966
BS EN 10268
BS EN 10131
BS EN 13895
Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal

for ASTM Standards

Search & Listing Portal

for ISO Standards

Search & Listing Portal

for IEC Standards

Search & Listing Portal

for BSI Standards

Search & Listing Portal

for DIN Standards

Cheapest Original BSI Standards 39

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm

 

BS ISO 18933:2006 BS ISO 18933:2006. Imaging materials. Magnetic tape. Care and handling practices for extended usage
BS EN 62282-3-2:2006 BS EN 62282-3-2:2006. Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
BS EN 61082-1:2006 BS EN 61082-1:2006. Preparation of documents used in electrotechnology. Rules
BS EN 60068-2-2:2007 BS EN 60068-2-2:2007. Environmental testing. Tests. Test B. Dry heat
BS ISO 23874:2006 BS ISO 23874:2006. Natural gas. Gas chromatographic requirements for hydrocarbon dewpoint calculation
BS ISO/IEC 18043:2006 BS ISO/IEC 18043:2006. Information technology. Security techniques. Selection, deployment and operations of intrusion detection systems
BS EN ISO 10424-2:2007 BS EN ISO 10424-2:2007. Petroleum and natural gas industries. Rotary drilling equipment. Threading and gauging of rotary shouldered thread connections
BS EN 1051-2:2007 BS EN 1051-2:2007. Glass in building. Glass blocks and glass pavers. Evaluation of conformity/Product standard
DD CEN/TS 14421:2006 DD CEN/TS 14421:2006. Hose tail and ferrule for crimping and swaging
BS EN 14422:2004 BS EN 14422:2004. Clamp type coupling assemblies for LPG transfer hoses
BS EN 14423:2004 BS EN 14423:2004. Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
BS 5702-3:2008 BS 5702-3:2008. Guide to statistical process control (SPC) charts for variables. Charting techniques for short runs and small mixed batches
BS ISO 6489-4:2004 BS ISO 6489-4:2004. Agricultural vehicles. Mechanical connections between towed and towing vehicles. Dimensions of piton-type coupling
DD CEN/TS 12390-9:2006 DD CEN/TS 12390-9:2006. Testing hardened concrete. Freeze-thaw resistance. Scaling
BS 5400-2:2006 BS 5400-2:2006. Steel, concrete and composite bridges. Specification for loads
BS EN 14460:2006 BS EN 14460:2006. Explosion resistant equipment
BS EN ISO 16201:2006 BS EN ISO 16201:2006. Technical aids for disabled persons. Environmental control systems for daily living
BS EN 14452:2005 BS EN 14452:2005. Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B
BS EN ISO 14816:2005 BS EN ISO 14816:2005. Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structure
DD CEN/TS 14417:2005 DD CEN/TS 14417:2005. Geosynthetic barriers. Test method for the determination of the influence of wetting/drying cycles on the permeability of clay geosynthetic barriers
DD CEN/TS 14418:2005 DD CEN/TS 14418:2005. Geosynthetic barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
BS EN ISO 10328:2006 BS EN ISO 10328:2006. Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods
BS ISO 23181:2007 BS ISO 23181:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
BS EN 14637:2007 BS EN 14637:2007. Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
ISO7296-3 : 2006 EDTN1 ISO7296-3 : 2006 EDTN1. ISO 7296-3 Cranes – Graphical symbols -. Part 3: Tower cranes
BS EN 60282-1:2006 BS EN 60282-1:2006. High-voltage fuses. Current-limiting fuses
BS EN 4530-001:2006 BS EN 4530-001:2006. Aerospace series. Sealing sleeves used in elements of connection. Technical specification
BS EN 4530-002:2006 BS EN 4530-002:2006. Aerospace series. Sealing sleeves used in elements of connection. List and utilization of sealing sleeves
BS EN 4530-005:2006 BS EN 4530-005:2006. Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for external diameter cable 3 mm to 4.1 mm. Product standard
BS EN 4530-006:2006 BS EN 4530-006:2006. Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm. Product standard
BS EN 61010-2-040:2005 BS EN 61010-2-040:2005. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
BS EN 62271-101:2006 BS EN 62271-101:2006. High-voltage switchgear and controlgear. Synthetic testing
BS EN 61189-2:2006 BS EN 61189-2:2006. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for materials for interconnection structures
BS EN 61189-3:2008 BS EN 61189-3:2008. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards)
BS EN 60519-2:2006 BS EN 60519-2:2006. Safety in electroheat installations. Particular requirements for resistance heating equipment
BS EN 61212-3-2:2006 BS EN 61212-3-2:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded tubes
BS EN 61212-3-3:2006 BS EN 61212-3-3:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded rods
BS EN 61212-1:2006 BS EN 61212-1:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
BS EN 61212-2:2006 BS EN 61212-2:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Methods of test
BS EN 61212-3-1:2006 BS EN 61212-3-1:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated rolled tubes
BS EN 60454-2:2007 BS EN 60454-2:2007. Pressure-sensitive adhesive tapes for electrical purposes. Methods of test
DD CLC/TS 60034-25:2005 DD CLC/TS 60034-25:2005. Rotating electrical machines. Guide for the design and performance of cage induction motors specifically designed for converter supply
BS EN 61189-6:2006 BS EN 61189-6:2006. Test methods for electrical materials, interconnection structures and assemblies. Test methods for materials used in manufacturing electronic assemblies
BS EN 55016-1-1:2007+A2:2008 BS EN 55016-1-1:2007+A2:2008. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus
BS EN 61347-2-7:2006 BS EN 61347-2-7:2006. Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for emergency lighting
BS EN 61048:2006 BS EN 61048:2006. Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
BS ISO 24334:2006 BS ISO 24334:2006. Laminate floor coverings. Determination of locking strength for mechanically assembled panels
BS ISO 24337:2006 BS ISO 24337:2006. Laminate floor coverings. Determination of geometrical characteristics
BS ISO 24339:2006 BS ISO 24339:2006. Laminate and textile floor coverings. Determination of dimensional variations after exposure to humid and dry climate conditions
BS ISO 24341:2006 BS ISO 24341:2006. Resilient and textile floor coverings. Determination of length, width and straightness of sheet
BS ISO 24342:2006 BS ISO 24342:2006. Resilient floor-covering tiles. Determination of side length, edge straightness and squareness
BS ISO 24343-1:2007 BS ISO 24343-1:2007. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation
BS ISO 24344:2008 BS ISO 24344:2008. Resilient floor coverings. Determination of flexibility and deflection
BS ISO 24346:2006 BS ISO 24346:2006. Resilient floor coverings. Determination of overall thickness
BS IEC 60748-4-3:2006 BS IEC 60748-4-3:2006. Semiconductor devices. Integrated circuits. Interface integrated circuits. Dynamic criteria for analogue-digital converters (ADC)
BS ISO 4366:2007 BS ISO 4366:2007. Hydrometry. Echo sounders for water depth measurements
BS EN 1367-1:2007 BS EN 1367-1:2007. Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
BS ISO 2537:2007 BS ISO 2537:2007. Hydrometry. Rotating-element current-meters
BS ISO 3455:2007 BS ISO 3455:2007. Hydrometry. Calibration of current-meters in straight open tanks
BS EN 61000-4-5:2006 BS EN 61000-4-5:2006. Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
BS EN 61249-2-2:2005 BS EN 61249-2-2:2005. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad
BS EN 62034:2006 BS EN 62034:2006. Automatic test systems for battery powered emergency escape lighting
BS EN 14488-2:2006 BS EN 14488-2:2006. Testing sprayed concrete. Compressive strength of young sprayed concrete
BS EN ISO 6860:2006, BS 3900-E11:2006 BS EN ISO 6860:2006, BS 3900-E11:2006. Paints and varnishes. Bend test (conical mandrel)
BS EN 62059-41:2006 BS EN 62059-41:2006. Electricity metering equipment. Dependability. Reliability prediction
ISO11193-2 : 2006 EDTN1 ISO11193-2 : 2006 EDTN1. ISO11193-2 : 2006 Single-use medical examination gloves. Part 2 : Specification for gloves made from poly(vinyl chloride)
BS EN 14497:2004 BS EN 14497:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the filtration stability
BS EN 14498:2004 BS EN 14498:2004. Products and systems for the protection and repair of concrete structures. Test methods. Volume and weight changes of injection products after air drying and water storage cycles
BS EN ISO 11138-1:2006 BS EN ISO 11138-1:2006. Sterilization of health care products. Biological indicators. General requirements
BS EN ISO 11138-2:2006 BS EN ISO 11138-2:2006. Sterilization of health care products. Biological indicators. Biological indicators for ethylene oxide sterilization processes
BS EN ISO 11138-3:2006 BS EN ISO 11138-3:2006. Sterilization of health care products. Biological indicators. Biological indicators for moist heat sterilization processes
BS EN ISO 11138-4:2006 BS EN ISO 11138-4:2006. Sterilization of health care products. Biological indicators. Biological indicators for dry heat sterilization processes
BS EN ISO 11138-5:2006 BS EN ISO 11138-5:2006. Sterilization of health care products. Biological indicators. Biological indicators for low-temperature steam and formaldehyde sterilization processes
BS ISO 21006:2006 BS ISO 21006:2006. Internal combustion engines. Engine weight (mass) declaration
PD ISO/TR 9824:2007 PD ISO/TR 9824:2007. Hydrometry. Measurement of free surface flow in closed conduits
BS EN 1071-4:2006 BS EN 1071-4:2006. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of chemical composition by electron probe microanalysis (EPMA)
BS EN 61287-1:2006 BS EN 61287-1:2006. Railway applications. Power convertors installed on board rolling stock. Characteristics and test methods
BS EN 61400-12-1:2006 BS EN 61400-12-1:2006. Wind turbines. Power performance measurements of electricity producing wind turbines
BS EN 2995-001:2006 BS EN 2995-001:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. Technical specification
PD CEN/TR 15310-5:2006 PD CEN/TR 15310-5:2006. Characterization of waste. Sampling of waste materials. Guidance on the process of defining the sampling plan
BS EN ISO 2692:2006 BS EN ISO 2692:2006. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN 2995-004:2006 BS EN 2995-004:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. With signal contact. Product standard
BS EN 2995-005:2006 BS EN 2995-005:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. With polarized signal contact. Product standard
BS EN 61755-2-1:2006 BS EN 61755-2-1:2006. Fibre optic connector optical interfaces. Optical interface standard single mode non-angled physically contacting fibres
BS EN 61755-2-2:2006 BS EN 61755-2-2:2006. Fibre optic connector optical interfaces. Optical interface standard single mode angled physically contacting fibres
BS EN 61000-4-1:2007 BS EN 61000-4-1:2007. Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
ISO9005 : 2007 EDTN2 ISO9005 : 2007 EDTN2. ISO9005 : 2007 Nuclear energy. Uranium dioxide powder and sintered pellets. Determination ofoxygen/uranium atomic ratio by the amperometric method
BS EN 4008-011:2006 BS EN 4008-011:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
BS EN 4008-012:2006 BS EN 4008-012:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
BS ISO 6107-7:2006, BS 6068-1.7:2006 BS ISO 6107-7:2006, BS 6068-1.7:2006. Water quality. Vocabulary. Part 7
BS EN 2996-001:2006 BS EN 2996-001:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. Technical specification
BS EN 2996-004:2006 BS EN 2996-004:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. With signal contact. Product standard
BS EN 2996-005:2006 BS EN 2996-005:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. With polarized signal contact. Product standard
BS EN 3661-001:2006 BS EN 3661-001:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Technical specification
BS EN 3661-005:2006 BS EN 3661-005:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Product standard
BS EN 3662-001:2006 BS EN 3662-001:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current from 20 A to 50 A. Technical specification
BS EN 3662-005:2006 BS EN 3662-005:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Product standard
BS EN 3662-006:2006 BS EN 3662-006:2006. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Bus-bar version. Product standard
BS EN 61241-0:2006 BS EN 61241-0:2006. Electrical apparatus for use in the presence of combustible dust. General requirements
BS EN 50401:2006 BS EN 50401:2006. Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz – 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service
BS EN 50400:2006 BS EN 50400:2006. Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz – 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service
BS EN ISO 10931:2005 BS EN ISO 10931:2005. Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system
BS EN 50131-1:2006 BS EN 50131-1:2006. Alarm systems. Intrusion and hold-up systems. System requirements
BS EN 60598-2-11:2005 BS EN 60598-2-11:2005. Luminaires. Particular requirements. Aquarium luminaires
BS EN 60745-2-21:2007 BS EN 60745-2-21:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
BS EN 61192-5:2007 BS EN 61192-5:2007. Workmanship requirements for soldered electric assemblies. Rework, modification and repair of soldered electronic assemblies
BS 6001-0:2006, ISO 2859-10:2006 BS 6001-0:2006, ISO 2859-10:2006. Sampling procedures for inspection by attributes. Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes
BS ISO 23470:2007 BS ISO 23470:2007. Soil quality. Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution
BS EN ISO 13503-2:2006 BS EN ISO 13503-2:2006. Petroleum and natural gas industries. Completion fluids and materials. Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
BS ISO 500-2:2004 BS ISO 500-2:2004. Agricultural tractors. Rear-mounted power take-off types 1, 2 and 3. Narrow-track tractors, dimensions for master shield and clearance zone
BS ISO 500-1:2004 BS ISO 500-1:2004. Agricultural tractors. Rear-mounted power take-offs. Types 1, 2 and 3. General specifications, safety requirements, dimensions for master shield and clearance zone
BS ISO 500-3:2004 BS ISO 500-3:2004. Agricultural tractors. Rear-mounted power take-off types 1, 2 and 3. Main PTO dimensions and spline dimensions, location of PTO
BS EN ISO 10535:2006 BS EN ISO 10535:2006. Hoists for the transfer of disabled persons. Requirements and test methods
BS EN 61753-092-6:2007 BS EN 61753-092-6:2007. Fibre optic interconnecting devices and passive components performance standard. Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test
BS EN ISO 140-16:2006 BS EN ISO 140-16:2006. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of the sound reduction index improvement by additional lining
BS EN ISO 140-18:2006 BS EN ISO 140-18:2006. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of sound generated by rainfall on building elements
BS ISO/IEC 25030:2007 BS ISO/IEC 25030:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality requirements
BS EN ISO 11137-3:2006 BS EN ISO 11137-3:2006. Sterilization of health care products. Radiation. Guidance on dosimetric aspects
BS 61535:2006 BS 61535:2006. Installation couplers intended for permanent connection in fixed installations
BS ISO 9696:2007 BS ISO 9696:2007. Water quality. Measurement of gross alpha activity in non-saline water. Thick source method
BS EN 60335-2-92:2005 BS EN 60335-2-92:2005. Household and similar electrical appliances. Safety. Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
BS EN 61076-1:2006 BS EN 61076-1:2006. Connectors for electronic equipment. Product requirements. Generic specification
BS EN 1622:2006 BS EN 1622:2006. Water quality. Determination of the threshold odour number (TON) and threshold flavour number (TFN)
BS EN ISO 14408:2005 BS EN ISO 14408:2005. Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
BS ISO/IEC 19763-1:2007 BS ISO/IEC 19763-1:2007. Information technology. Metamodel framework for interoperability (MFI). Reference model
BS EN 60745-2-15:2006 BS EN 60745-2-15:2006. Hand-held motor-operated electric tools. Safety. Particular requirements for hedge trimmers
BS ISO/IEC19763-3:2007 BS ISO/IEC19763-3:2007. Information technology. Metamodel framework for interoperability (MFI). Metamodel for ontology registration
BS EN 60695-4:2006 BS EN 60695-4:2006. Fire hazard testing. Terminology concerning fire tests for electrotechnical products
BS EN ISO 734-1:2006 BS EN ISO 734-1:2006. Oilseed meals. Determination of oil content. Extraction method with hexane (or light petroleum)
BS 7394-2:2007 BS 7394-2:2007. Complete spectacles. Specification for prescription spectacles
ISO2137 : 2007 EDTN3 ISO2137 : 2007 EDTN3. ISO2137 : 2007 Petroleum products and lubricants. Determination of cone penetration of lubricating greases and petrolatum
BS EN 62319-1:2005 BS EN 62319-1:2005. Polymeric thermistors. Directly heated positive step function temperature coefficient. Generic specification
BS EN 62319-1-1:2005 BS EN 62319-1-1:2005. Polymeric thermistors. Directly heated positive step function temperature coefficient. Blank detail specification. Current limiting application
BS ISO/IEC 15944-2:2006 BS ISO/IEC 15944-2:2006. Information technology. Business operational view. Registration of scenarios and their components as business objects
BS ISO/IEC 15944-4:2007 BS ISO/IEC 15944-4:2007. Information technology. Business operational view. Business transaction scenarios. Accounting and economic ontology
ISO21009-2 : 2006 EDTN1 ISO21009-2 : 2006 EDTN1. ISO 21009-2 Cryogenic vessels – Static vacuum insulated vessels -. Part 2: Operational requirements
BS ISO/IEC 13249-1:2007 BS ISO/IEC 13249-1:2007. Information technology. Database languages. SQL multimedia and application packages. Framework
BS ISO/IEC 13249-3:2006 BS ISO/IEC 13249-3:2006. Information technology. Database languages. SQL multimedia and application packages. Spatial
BS ISO/IEC 13249-6:2006 BS ISO/IEC 13249-6:2006. Information technology. Database languages. SQL multimedia and application packages. Data mining
BS ISO 20683-2:2004 BS ISO 20683-2:2004. Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear . Regional aircraft
BS EN 415-5:2006 BS EN 415-5:2006. Safety of packaging machines. Wrapping machines
BS EN 13476-2:2007 BS EN 13476-2:2007. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
DD CEN/TS 14541:2007 DD CEN/TS 14541:2007. Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials
BS EN 14538:2006, BS 2000-547:2006 BS EN 14538:2006, BS 2000-547:2006. Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)

Cheapest Original BSI Standards 2-1000

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm

 

BS EN 13226
BS EN 12847 2009
BS EN 13075-2 2009
BS EN 12591
DD IEC/TS 62564-1
09/30187488 DC 09/30187488 DC
BS EN 14121
09/30187535 DC 09/30187535 DC
09/30187538 DC 09/30187538 DC
09/30187541 DC 09/30187541 DC
BS EN 10028-2
BS EN 10028-3
BS EN 10028-4
BS EN 10028-5
BS EN 10028-6
BS EN ISO 24373
BS EN ISO 26304
09/30187580 DC 09/30187580 DC
PD CLC/TR 50481
ISO/IEC15459-8
ISO/IEC18000-7
09/30187671 DC 09/30187671 DC
ISO/IEC26925
ISO/IEC12862
ISO/IEC17344
ISO/IEC17341
ISO/IEC29642
09/30187760 DC 09/30187760 DC
BS EN 14133
BS EN 14132
09/30187923 DC 09/30187923 DC
09/30188083 DC 09/30188083 DC
DD IEC/PAS 60539-1-1
09/30188300 DC 09/30188300 DC
BS ISO 10935
09/30188337 DC 09/30188337 DC
BS EN 14081-4
09/30188385 DC 09/30188385 DC
09/30188568 DC 09/30188568 DC
09/30188869 DC 09/30188869 DC
BS EN 2543
BS EN 3329
BS EN 3330
09/30189104 DC 09/30189104 DC
09/30189108 DC 09/30189108 DC
BS IEC 61588
09/30189298 DC 09/30189298 DC
BS EN 12808-4
BS EN 14618
BS EN 50411-2-5
09/30189801 DC 09/30189801 DC
ISO18286
09/30189868 DC 09/30189868 DC
09/30189953 DC 09/30189953 DC
09/30189955 DC 09/30189955 DC
09/30189957 DC 09/30189957 DC
BS EN 15254-2
BS EN 13743
PD CEN/TR 14383-7
BS ISO 725
BS EN ISO 23811
09/30190250 DC 09/30190250 DC
PD CEN/TR 12401
BS EN 10225
BS EN 10238
BS ISO 13779-2
BS ISO 13779-1
09/30190446 DC 09/30190446 DC
09/30190473 DC 09/30190473 DC
09/30190545 DC 09/30190545 DC
PD ISO/TR 24156
DD ISO/TS 13434
09/30190856 DC 09/30190856 DC
09/30190859 DC 09/30190859 DC
09/30190862 DC 09/30190862 DC
09/30190865 DC 09/30190865 DC
BS ISO 30042
09/30191202 DC 09/30191202 DC
09/30191277 DC 09/30191277 DC
09/30191285 DC 09/30191285 DC
BS EN ISO 1628-1
09/30191349 DC 09/30191349 DC
DD IEC/PAS 61169-18
DD IEC/PAS 61169-19
DD IEC/PAS 61169-35
DD IEC/PAS 61169-41
BS EN ISO 20361
BS EN ISO 8359
BS EN ISO 9360-2
BS EN ISO 8835-2
09/30191867 DC 09/30191867 DC
09/30191924 DC 09/30191924 DC
09/30191988 DC 09/30191988 DC
09/30192009 DC 09/30192009 DC
BS EN ISO 22867
BS EN 299
BS EN 13751
09/30192061 DC 09/30192061 DC
09/30192150 DC 09/30192150 DC
DD IEC/PAS 62596
09/30192320 DC 09/30192320 DC
09/30192323 DC 09/30192323 DC
09/30192338 DC 09/30192338 DC
09/30192383 DC 09/30192383 DC
09/30192428 DC 09/30192428 DC
DD ISO/TS 16457
09/30192488 DC 09/30192488 DC
BS EN ISO 18777
09/30192568 DC 09/30192568 DC
BS 4500 500, lengths from 6 mm to 630 mm and diameters up to 500 mm
BS 1916-1
BS 1916-2
BS 1916-3
09/30192653 DC 09/30192653 DC
BS EN 3155-032
BS EN 3155-033
09/30192714 DC 09/30192714 DC
DD ISO/TS 12854
BS EN ISO 8596
BS EN ISO 11981
BS EN ISO 15254
BS EN ISO 10944
BS EN ISO 10341
BS EN ISO 10343
BS 4311-2
09/30193226 DC 09/30193226 DC
09/30193281 DC 09/30193281 DC
09/30193287 DC 09/30193287 DC
BS EN ISO 12870
09/30193376 DC 09/30193376 DC
BS EN ISO 14534
09/30193399 DC 09/30193399 DC
BS EN ISO 15004-1
BS EN ISO 11979-8
09/30193520 DC 09/30193520 DC
BS EN ISO 8835-5
BS EN ISO 9919
BS EN ISO 10651-6
BS EN ISO 1889
09/30193765 DC 09/30193765 DC
09/30193787 DC 09/30193787 DC
09/30193804 DC 09/30193804 DC
09/30193808 DC 09/30193808 DC
BS EN ISO 10651-2
09/30193817 DC 09/30193817 DC
BS EN 61966-5
09/30193829 DC 09/30193829 DC
09/30193854 DC 09/30193854 DC
BS EN ISO 7376
BS EN 13445-1
BS EN ISO 10651-4
BS EN ISO 8835-4
BS EN 13445-2
BS EN ISO 18778
BS EN 13445-3
BS EN ISO 8185
BS EN ISO 5360
BS EN 13445-4
BS EN ISO 11197
BS EN 13445-5
BS EN ISO 21647
BS EN 13445-6
09/30194014 DC 09/30194014 DC
09/30194124 DC 09/30194124 DC
BS EN ISO 5366-1
09/30194263 DC 09/30194263 DC
BS 8406
PD 6689
09/30194335 DC 09/30194335 DC
BS EN ISO 16484-6
BS EN 13445-8
BS EN ISO 14896
BS EN ISO 8836
BS EN ISO 9360-1
BS EN ISO 10993-9
BS EN ISO 10993-6
BS EN ISO 10993-3
09/30194494 DC 09/30194494 DC
BS EN 14188-4
BS EN 15466-1
BS EN 15466-2
BS EN 15466-3
DD ISO/TS 13075
09/30194585 DC 09/30194585 DC
09/30194709 DC 09/30194709 DC
09/30194950 DC 09/30194950 DC
BS EN ISO 23210
ISO23570-3
09/30195191 DC 09/30195191 DC
DD IEC/PAS 62612
BS ISO 8082-1
BS EN ISO 10993-18
BS EN ISO 10993-17
BS EN ISO 10993-16
BS EN ISO 10993-14
BS EN ISO 10993-13
BS EN ISO 10993-12
BS EN ISO 10993-11
09/30195381 DC 09/30195381 DC
BS EN 4199-005

Cheapest Original BSI Standards 2-38000

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal for ASTM Standards

Search & Listing Portal for ISO Standards

Search & Listing Portal for IEC Standards

Search & Listing Portal for BSI Standards

Search & Listing Portal for DIN Standards

BS 6008
BS 6049-1
BS 6049-2
BS 6049-7
BS 6161 1984, ISO 2106-1982
BS 2484
BS 350-1
BS 350 Part 2 Supplement No
BS 1957
BS 2979
BS 2979C
BS 3669
BS 4754
BS 4755
BS 4280
BS 4811
BS 5261-1
BS 5408
BS 5515
BS 5641
BS 5848
BS 1411
BS 1467
BS 3020
BS 3203
BS 3814
BS 4160
BS 4277
BS 4666
BS 4971-2
BS 5097-1
BS 4748
BS 5249-2
BS 5249-3
BS 5332
BS 5999
BS 5513
BS 6054 1984, ISO 6196/3-1983
BS 6247
BS 6313
BS 6321
BS 6100-1
BS 1647-1
BS 1647-2
BS 4359 1984
BS 5202-1
BS 5202 1976, ISO 3406-1975
BS 5202 1982, ISO 4389-1981
BS 5202-11
BS 5381 1979, ISO 3612-1977
BS 5381-5
BS 6245-1
BS 6245-2
BS 4401 1980, ISO 936-1978
BS 4401-2
BS 4401 1970
BS 4401-4
BS 4401 1970
BS 4401 1981
BS 4401-7
BS 4401-8
BS 4401-9
BS 4401 1975, ISO 2294-1974
BS 4401 1979, ISO 3496-1978
BS 4401-12
BS 4401-13
BS 4401-14
BS 4401-15
BS 5551-1
BS 5551-1
BS 5551-2
BS 5551-2
BS 5551-2
BS 5551-4
BS 5551-4
BS 5551-4
BS 5551-4
BS 5551-4
BS 5551-4
BS 5551-4
BS 5763-5
BS 5763 1983, ISO 6887-1983
BS 5763 1983, ISO 6888-1983
BS 5766-1
BS 5766 1981, ISO 6491-1980
BS 5766 1981, ISO 5983-1979
BS 5766 1981, ISO 6495-1980
BS 5766-6 1983
BS 5766-8
BS 5766-9
BS 5929-2
BS 5929-3
BS 6215-1
BS 6215-2
BS 3108
BS 3170
BS 749
BS 752
BS 2455 1973
BS 2455 1983
BS 2486
BS 2885
BS 3812
BS 5968
BS 6023
BS 5355
BS 5396
BS 6061
BS 6071
PD 6488
BS 1565-1
BS 1565-2
BS 3198
BS 599
BS 1655
BS 4082-1
BS 4082-2
BS 5151
BS 5152
BS 5153
BS 5155
BS 5159
BS 5257
BS 5352
BS 5793-5 1982
BS 5840-2
BS 684-1
BS 684-1
BS 684-1
BS 684-2
BS 5258-2
BS 5258-7
BS 5258-8
BS 5258-10
BS 5258-11
BS 5258 1984
DD 84
BS 1179
BS 1179-6
BS 5482 1979
CP 3008
BS 3561
BS 4096
BS 5986
BS 6332-2
BS 6332-3
BS 6332-4
BS 3879
BS 2852 1982
BS 4718
BS 4856-1
BS 4856-2
BS 4856-3
BS 4856 1978
BS 4856 1979
BS 4857-1
BS 4857-2
BS 4954-1
BS 4954-2
BS 5141-1
BS 5491
BS 848 1980
BS 6339
BS 6248-2
BS 5131-1
BS 5131-1
BS 5131-1
BS 5131-2
BS 5131-2
BS 5131-2
BS 5131-3
BS 5131-3
BS 5131-4
BS 5131-4
BS 5131-4
BS 5131-4
BS 5131-5
BS 5131-5
BS 5131-5
BS 5131-5
BS 5131-5
BS 5131-5
BS 5131-6
BS 5131-6
BS 5511
BS 5592
BS 6185
BS 6249 1982
BS 1809
BS 1836 1982, ISO 344-1981
BS 2047 1983, ISO 93/1-1982
BS 2047 1982, ISO 93/3-1981
BS 2547 1978, ISO 575-1978
BS 2547 Part 7 1979, ISO 574 1978
BS 2547 1983, ISO 3914/1-1982
BS 2547 1982, ISO 3914/2-1981
BS 2794 1977, ISO 2205-1975
BS 2794 1977, ISO 98-1977
BS 2794 1978, ISO 5235-1977
BS 2794 1979, ISO 5233-1978
BS 2936 1981, ISO 5234-1980
BS 3182 1983, ISO 365-1982
BS 3182 1978, ISO 568-1976
BS 3182-4 dimensions
BS 3182-5 dimensions
BS 3182 1984, ISO 6457-1982
BS 3182 1984, ISO 570-1982
BS 3182 1984, ISO 364-1983
BS 6228
BS 6197
BS 4261
BS 4751
BS 1434
BS 5772 Part 8 1985, IEC 60512-8 1984
BS 5190
BS 3143-1
BS 3900 1985, ISO 3233-1984
BS 3571-1
BS 2493
BS 5045-3
BS 6117
BS 6119-1
BS 5713
BS 3463
BS 5542 1977
BS MA 25
BS 3828
BS 2648
BS 4309
BS 615
BS 675
BS 676
BS 701
BS 1739 1981
BS 1792
BS 2701
BS 2734
BS 2735
BS 6352
BS 894
BS 748
BS 795
BS 1749
BS 1808
BS 5772 Part 1 1985, IEC 60512-1 1984
BS 585-2
BS 1339
BS 5834-2
BS 5854
BS 567
BS 835
BS 41
BS 3377
CP 3000
BS 5410-3
BS 2580
BS 5433
BS 1010-2
BS 1415-1
BS 5388
BS 5779
BS 1968
BS 3457
BS 6280
BS 6281-2
BS 6281-3
BS 6282-1
BS 6282-2
BS 6282-3
BS 6282-4
BS 5927
BS 4625
BS 6437
BS 5292
BS 3958-1
BS 3958-2
BS 3958-4
BS 3958-6
BS 5760-3
BS 5518
BS 6259
BS 6330
BS 2655-1
BS 2655-5
BS 2655-6
BS 2655-7
BS 2655-8
BS 2655-9
BS 2655-10
BS 3225 1984, ISO 6175-1983
BS 3240
BS 4266
BS 4302 Part 1 1978, ISO 341 1976
BS 4302 Part 3 1978, ISO 2012 1976
BS 4302 Part 4 1982, ISO 6176 1981
BS 4977
BS 5198
BS 5508
BS 5509
BS 5521
BS 5753 1979
BS 5948 1980, ISO 4814-1980
BS 5948 1981, ISO 4815-1980
BS 6246 1983
BS 6246 1983
BS 6378
BS 953
BS 6473
BS 4110
BS 4224
BS 4423
BS 4474
BS 5243
BS 5361
BS 6183-1
BS 3102
BS 4985
BS 2457
BS 2459
BS 6381
BS EN ISO 6414
BS 376-1
BS 376-2
BS 1553-2
BS 1646-1
BS 1646-2
BS 1646-3
BS 1646-4
BS 3238-1
BS 3238-2
BS 3363 1969
BS 3363 Supplement No
BS 3363 Supplement No
BS 2856
PD 6470
PD 6481
PD 6507
PD 7300
BS 4341
BS 4367
BS 4404
BS 4450 1974
BS 4459
BS 4695
BS 4714
BS 4774
BS 5072-1
BS 5072-2
BS 5072-3
BS 5072-4
BS 5072-5
BS 5072-6
BS 5072-7
BS 5072-8
BS 5072-9
BS 5309-1
BS 5309-2
BS 5309-3
BS 5309-4
BS 187
BS 5443
BS 5634
BS 5688-1 1972
BS 5688-3 1972
BS 5688-4 1972
BS 5688-5 1972
BS 5688-6 1972
BS 5688-7 1972
BS 5688-8 1972
BS 5688-9 1972
BS 5688-10 1975
BS 5688-11 1975
BS 5688-12 1975
BS 5688-13 1976
BS 5688-14 1976
BS 5688-15 1976
BS 5688-16 1976
BS 5688-17 1976
BS 5688-18 1976
BS 5688-19 1976
BS 5688-20 1976
BS 5688-21 1975
BS 5656 1983
BS 5965
BS 6440
BS 466
BS 6601
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 4737-3
BS 5445-7 1982
BS 5445-8 1982
BS 5445-9 1982
BS 5839-2
BS 3251
BS 5041-3
BS 5041-4
BS 5041-5
BS 5306-1
BS 5306-5
BS 6391
BS 6073-2
BS 4022
BS 5427
BS 680 1944
BS 690-2
BS 690-5
BS 690-6
BS 4154-1
BS 4154-2
BS 1133-5
BS 1133 1954
BS 3130 Subsec1 1974 BS 3130 Part 3 1974, BS 1133 Sec18 Subsec1 1974
BS 3130-4
BS 3130-6
BS 3177
BS 3951-1
BS 5073
BS 5771 1978
BS 4155
BS 1764
BS 2006
BS 5567
BS 5774
BS 2987
BS 3110
BS 3755
BS EN 24178 1980
BS 6069-1 1993
BS 6069-2 1994
BS 1000[633/635]
BS 2947 1984
BS 1400
BS 1000[663]
BS 2011-2
BS 1428-B2
BS 1428-D1
BS 1428-D5
BS 604 1980
BS 700-1 1981
BS 700-2 1981
BS 700-3 1981
BS 2058
BS 3996
BS 5404-1
BS 5404-2
BS 5404-3
BS 5404-4
BS 2765
BS 3273
BS 4937 1973
BS 4937 1973
BS 4937 1973
BS 4937 1973
BS 4937 1974
BS 4937 1974
BS 4937 1974
BS 5074
BS 1230-1
BS 1088 & 4079
BS 1105
BS 4841-2
BS 5803-1
BS 5803-2
BS 5803-3
BS 5803-4
BS 5803-5
BS 3830
BS 1202-1
BS 1202-2
BS 1202-3
BS 1579
BS 2911
BS 4951
BS 5725 1981
BS 5872
BS 6181
BS 4A 4
BS 4A 4-1
BS A 22
BS 2A 24
BS 2A 25
BS 2A 26
BS 2A 27
BS 2A 29
BS 2A 30
BS A 31-54
BS A 55 and 56
BS 2A 57
BS 2A 58
BS 2A 59
BS 2A 60
BS 2A 61
BS A 101
BS 3A 102
BS 3A 103
BS 3A 104
BS 3A 105
BS 3A 107
BS 3A 108
BS 2A 110
BS 3A 113
BS 3A 114
BS 3A 116
BS 3A 117
BS 2A 122; 2A 123; 2A 124
BS 3A 125 to 3A [
BS 3A 169
BS 3A 170
BS 3A 171
BS 2A 173
BS 2A 174
BS 2A 175
BS 2A 204; 2A 206 [
BS 2A 210
BS A 211
BS A 226
BS A 227
BS 3A 228
BS 2A 229
BS 4A 4-1
BS 1000[676]
BS 2922-1
BS 2922-2
BS 2924-1 1981
BS 3137
BS 3631
BS 4685
BS 4816
BS 4817
BS 6225-1
BS 6225-2
BS 4839-1
BS 4839-2
BS 6162
BS 3732-2
BS 3732-3
BS 4566
BS 4672-1
BS 4672-2
BS 5167 1978
BS 667
BS 3880-1
BS 3880-2
BS 3880-3
BS 3880-4
BS 4636-1
BS 4636-2
BS 3649
BS 4496
BS 2913
BS 4321
BS 4432 1980, ISO 2469-1977
BS 4432-2
BS 4432 1980, ISO 2471-1977
BS 4432-4
BS 612
BS 733 1983, ISO 3507-1976
BS 756
BS 1752 1980
BS 2069
BS 2461
BS 2586
BS 2761
BS 3218
BS 5922
BS 5865
BS 2846-2
BS 2846-3 1975
BS 2846-4
BS 2846-5
BS 2846-6
BS 2846 1984
BS 5668 1983, ISO 7210-1983
BS 3145
BS 3385
BS 4314-1
BS 5704 1974
BS 1170
BS 3403
BS 1807
BS 3501
BS 4263
BS 4268
PD 6430
PD 6430/1 report, basic programme and guide
BS EN 26595 1983,ISO 6595-1985
BS 6068-2
BS EN 25813 1993,ISO 5813-1983
BS 6068 Part 2 Section 2
BS 6068 Part 2 Section 2
BS 6068 Part 2 Section 2
BS 6068-2
BS 6068-2
BS 6068-2
BS 6068-2
BS 6068-2
BS EN 25667-1 1994, BS 6068-6
BS 6075-0
BS 6075-1
BS 6075-2
BS 6075-3
BS 6075-4
BS 6075-5
BS 6075-6
BS 6075-7
BS 6075-8
BS 6075-9
BS 6075-10
BS 6075-11
BS 6075-12
BS 6075-14
BS 6092-0
BS 6092-1
BS 6092-2
BS 6092-3
BS 6092-4
BS 6092-5
BS 6092-6
BS 6092-7
BS 6092-8
BS 6092-9
BS 6092-10
BS 6092-11
BS 6092-12
BS 6337-1
BS 6337-2
BS 6337-3
BS 6337-4
BS 2511
BS 5610
BS 2977
BS 3929
BS 6237
BS 3282
BS 4642
BS 5494
BS 6047-1
BS 6067
BS MA 2-2
BS MA 2-3
BS MA 5
BS MA 6
BS MA 7
BS MA 8
BS MA 9
BS MA 10
BS MA 11
BS MA 12-1
BS MA 12-2
BS MA 13
BS MA 14
BS MA 16
BS MA 17
BS MA 18
BS MA 19
BS MA 20
BS MA 21
BS MA 22
BS MA 23
BS MA 24
BS MA 26
BS MA 27
BS MA 28
BS MA 30
BS MA 31
BS MA 33
BS MA 34
BS MA 35
BS MA 36
BS MA 37
BS MA 38
BS MA 39-1
BS MA 39-2
BS MA 39-3
BS MA 40-1
BS MA 40-2
BS MA 40-3
BS MA 41
BS MA 42
BS MA 44
BS MA 45
BS MA 46
BS MA 47
BS MA 48
BS 2A 230
BS A 232
BS A 233-236
BS A 237-240
BS A 241
BS A 242; A 243; A 244; A 245
BS A 246; A 247; A 248; A 249
BS A 250; A 251; A 252; A 253
BS A 254; A 255 [
BS A 260; A 261 [
BS A 273
BS A 274
BS A 275; A 276 [
BS A 281; A 282 [
BS A 287; A 288 [
BS A 293
"BS A 294 1983 "
BS 2B 8
BS 2B 21
BS 2C 2
BS 2C 4
BS 2C 5
BS C 6
BS C 10
BS 2C 12
BS C 15
BS C 17
BS C 18
BS 2E 21
BS 4F 33
BS 6F 34
BS 7F 35
BS 2F 52
BS 4F 54
BS 3F 63
BS 2F 66
BS 2F 67
BS 3F 68
BS 2F 114
BS 2F 115
BS 2F 116
BS F 125
BS MA 52
BS MA 53
BS MA 54
BS MA 55
BS MA 56
BS MA 57
BS MA 59
BS MA 61
BS MA 62
BS MA 69
BS MA 70-1
BS MA 72
BS MA 73
BS MA 74-2
BS MA 75-1
BS MA 75-2
BS MA 77
BS MA 78
BS MA 79
BS MA 81
BS MA 82
BS MA 85
BS MA 86
BS MA 87-1
BS MA 87-2
BS MA 89
"BS MA 90 1979 "
BS MA 92
BS MA 93
BS MA 94
BS MA 97
BS MA 98-1
BS MA 99-1
"BS 1000 1974 "
BS 1000[0]
BS 1000[1]
BS 1000[2]
BS 1000[32]
BS 1000[35/354]
BS 1000[355/359]
BS 1000[368]
BS 1000[37]
BS 1000[383/389]
BS 1000[39]
BS 1000[5/50]
BS 1000[51]
BS 1000[52]
BS 1000[53]
BS 1000[54]
BS 1000[55]
BS 1000[56]
BS 1000[57]
BS 1000[59]
BS 1000[621/621
BS 1000[621
BS 1000[621
BS 1000[621
BS 1000[621
BS 1000[621
BS 1000[621
BS 1000[621
BS 1000[622]
BS 1000[623]
BS 1000[624]
BS 1000[625]
BS 1000[626/627]
BS 572
BS 3143-4
BS 3490
BS 5342
BS 4185 1985
BS 3683-4
BS 1000[664]
BS 1780
BS 3062
BS 3779
BS 4791
BS 5268 1985
BS 5588 1985
BS 5628 1985
BS 6561
BS 6625 1985
BS 3G 100-0
BS 3G 100-1
BS 2G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-3
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-2
BS 3G 100-4
BS 3G 100-4
BS G 102
BS 2G 111
BS 2G 112
BS 2G 113
BS 2G 114
BS 2G 115
BS 2G 117
BS G 118
BS G 122
BS G 123
BS 2G 124-1
BS 2G 124-2
BS G 125
BS 2G 127
BS 2G 132
BS G 133
BS 2G 134
BS 2G 135
BS G 142
BS 2G 143
BS 2G 146
BS 2G 147-1
BS 2G 147-2
BS 3G 148
BS G 152
BS G 154
BS G 174
BS G 175
BS G 176-1
BS G 176-2
BS G 176-3
BS G 176-4
BS G 176-5
BS G 177
BS G 179 1962
BS G 179 1966
BS 2G 180
BS 2G 182
BS G 183
BS G 184 to G 188
BS G 189
BS G 190
BS G 192
BS G 193
BS G 195
BS 2G 196
BS 3G 197
BS 2G 198 1982
BS 2G 199
BS 1016-1
BS 1016-2
BS 1016 1977
BS 1016-14
BS 1016 1979
BS 1016 1981
BS 1016 1981, ISO 5074-1980
BS 1016-21 1975
BS 3142-3
BS 3156 1969
BS 3804 1964
BS 4262
BS 4445
BS 4845-1
BS 4845-2
BS 6127 1981
BS 6127-2
BS 6127 1981
BS 6127 1981
BS 2740
BS 2741
BS 2742
BS 2811
BS 893
BS 3048
BS 3407
BS 4161-1
BS 4161-2
BS 4161-4
BS 4161-7
BS 4878
BS 2593
BS 227
BS 248
BS 2969
BS 3237
BS 4073
BS 4521-1
BS 4521-1
BS 4521-2
BS 4521-3
BS 4521-3
BS 4521-4
BS 4854
BS 600
BS 4497
BS 4498 1981
BS 4499
BS 4501
BS 4574
BS 4588
BS 4616
BS 4747 1980, ISO 801/1-1979
BS 4747 1980, ISO 801/2-1979
BS 4896
BS 4897-1
BS 5477
BS 5879
BS 6035-1
BS 6035-2 1980
BS 6036
BS 6094-1 1979
BS EN 25264-2 1979
BS 6095
BS EN 27213 1981
BS 6306-1 1981
BS 6306-2 1981
BS 2045
BS 6000
BS 5464-1 1976
BS 5464-3 1983
BS 5079
BS 4850 1972
BS 4850 1972
BS 5356 1976
BS 5356 1976
BS 5359
BS 5595 1978, ISO 4337-1977
BS 5595 1981, ISO 5653-1980
BS 4810
BS 5769-1
BS 5887
BS 6238
BS 5870
BS 4822
BS 5448
PD 6462
BS 2481-4
BS 5519-1 1976
BS 5519-2
BS 5519-3
BS 5519-4
BS 5519-5
BS 5479-1
BS 5479-2
BS 5479-3
BS 5960
BS 6050
BS 5560
BS 3738-1
BS 3738-2
BS 3738-3
BS 5479-4
BS 4897-2
BS 4897-3
BS 4897-4 1982
BS 1000[636/639]
BS 1000[64]
BS 1000[654]
Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal for ASTM Standards

Search & Listing Portal for ISO Standards

Search & Listing Portal for IEC Standards

Search & Listing Portal for BSI Standards

Search & Listing Portal for DIN Standards

Cheapest Original BSI Standards 2-29000

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal for ASTM Standards

Search & Listing Portal for ISO Standards

Search & Listing Portal for IEC Standards

Search & Listing Portal for BSI Standards

Search & Listing Portal for DIN Standards

WD/HB10004 WD/HB10004
DD ENV 13154-2
BSISO12640
BS ISO 11800
BS EN 1923
BS EN 844-10
BS EN 844-11
BS EN 755-2
BS EN ISO 8618 1998, BS 2782-4 Method 451M 1998
BS EN ISO 8619 1998, BS 2782-8 Method 835H 1998
BS EN 60454-3-8 1998
BS EN 60454-3-9 1998
BS EN 60454-3-11 1998
BS EN 60454-3-12 1998
BS EN 60454-3-4 1998
BS EN 60454-3-5 1998
BS EN 60454-3-6 1998
BS EN 60454-3-7 1998
BS EN 12128
BS EN 12296
BS EN 12297
BS EN 12298
PD 6630 1998
BS EN ISO 13370
BS EN 60695-1-1 1995
BS EN 12308
98/202052DC 98/202052DC
98/202051DC 98/202051DC
98/202066DC 98/202066DC
BS 4756
KIT 50 KIT 50
BS ISO/IEC 14478-1
BS ISO/IEC 14478-2
BS ISO/IEC 14478-3
BS ISO/IEC 14478-4
BS ISO 8543
BS EN 692
BS 4483
BS EN ISO 7371
BS 7854-3 1998
BS 7854-4 1998
BS ISO 10791-4
98/231051DC 98/231051DC
BS EN ISO 1421
BS EN 1097-3
98/122471DC 98/122471DC
98/541375DC 98/541375DC
98/261629DC 98/261629DC
98/122295DC 98/122295DC
BS ISO 13592
BS Z 10 1998
BS EN 752-6
DD ENV 12014-4
DD ENV 12014-3
BS EN 12346
BS EN 957-8
BS EN 957-7
BS EN ISO 8561
BS EN 12015
BS EN 12016
BS EN 60601-2-23 1998, BS 5724-2
BS EN 1737
BS EN 1738
BS EN 1317-1
BS ISO 7198
BS 6043-2
BS EN 45510-6-1
98/708312DC 98/708312DC
98/708298DC 98/708298DC
BS EN 60875-1 1998, IEC 60875-1 1996,QC 810000 1996
BS EN 60875-1-1 1998, IEC 60875-1-1 1996,QC 810001 1996
BS ISO TR 3313
BS ISO TR 15377
BS ISO 14180
BS EN 61300-3-21 1998
BS EN 61300-3-40 1998
BS EN 1770
BS ISO 9022-10
BS ISO 4619
BS ISO 11994
BS ISO 11630
BS ISO 12478-1
BS EN 1861
BS EN 2644
98/122587DC 98/122587DC
98/122588DC 98/122588DC
98/122589DC 98/122589DC
BS EN 4105
BS EN 3948
BS EN 3947
BS EN 3944
BS EN 3940
BS EN 3931
BS EN 3928
BS EN 3924
BS EN 3922
BS EN 3919
BS EN 3918
BS EN 3207
BS EN 3917
BS EN 60454-3-3 1998
BS EN 61395 1998
BS EN 186170
BS EN 61300-2-41 1998
BS EN 61751 1998
BS EN 1740
BS EN 1741
BS EN 1742
BS 4363
BS EN ISO 6877
98/122511DC 98/122511DC
98/122516DC 98/122516DC
98/122521DC 98/122521DC
98/541500DC 98/541500DC
BS EN 920
BS EN 1541
BS EN 539-2
BS EN 410
BS EN 2942
BS EN 2944
BS EN 2945
BS EN 3008
BS EN 3009
BS EN 3010
BS EN 3011
BS EN 3044
BS EN 3542
BS ISO 6751
BS ISO 6753-2
BS ISO 8694
BS ISO 11415
BS EN ISO 13090-1
PD 6631
BS IEC 61428
BS ISO/IEC 8802-2
BSI Shade gauge BSI Shade gauge
98/708732DC 98/708732DC
98/541527DC 98/541527DC
BS 7926
BS 7925-1
BS 7925-2
BS EN 1254-5
BS EN 1254-1
BS EN 12462
BS EN 12682
BS EN 12683
BS EN 12685
BS EN 12686
BS EN 12687
BS EN 12689
PD 6632 1998
BS EN 61400-12 1998
BS EN 1017
BS EN 1018
BS EN 1405
BS EN 1406
BS EN 1407
BS EN 1408
BS EN 1409
BS EN 1410
98/122849DC 98/122849DC
98/202315DC 98/202315DC
BS EN ISO 5165 1998, BS 2000-41 1998,ISO 5165 1998
BS EN 116 1998
BS EN ISO 6246 1998, BS 2000-131 1998,ISO 6246 1995
BS EN ISO 13736 1998
BS EN 521
BS N 6
BS 4001-1
BS CECC 200025
BS EN 60601-2-24 1998, BS 5724-2
BS EN ISO 14982
BS ISO 15469
BS ISO 1122-1
BS A 327 1998
BS 2A 294 1998
BS A 325 1998
BS A 326 1998
BS EN ISO 10673
BS Z 11 1998
BS ISO 15
BS EN 153000
BS ISO 7278-3 1998
BS 684-1
98/541608DC 98/541608DC
98/654079DC 98/654079DC
98/708827DC 98/708827DC
BS ISO 1985
98/261911DC 98/261911DC
BS ISO 8548-4
BS EN 61069-6 1998
BS IEC 60874-10-3 1997
BS IEC 60874-14-1 1997
BS 4553-1
BS 4553-2
BS 4553-3
BS 3900-J3 1998, ISO 8130-6 1992 and Amd1 1998
BS EN 60794-3 1998
BS EN 61360-2 1998
BS IEC 61314-1-1 1996, IEC 61314-1-1 1996,QC 880001 1996
BS EN 60143-3 1998
BS EN 61557-6 1997
BS ISO TR 12767
BS ISO 15166-1
98/202493DC 98/202493DC
98/122960DC 98/122960DC
98/122962DC 98/122962DC
98/122963DC 98/122963DC
98/541656DC 98/541656DC
98/541667DC 98/541667DC
BS 7889
BS EN ISO 15141-1
BS EN ISO 15141-2
BS EN 1900
BS EN 12655
BS ISO TR 5658-1
BS EN 50107
BS ISO 9022-3
BS ISO 9022-13
BS ISO 9022-15
BS ISO 9022-16
BS ISO 9022-21
BS ISO 14050
BS EN 10130
BS EN 60904-7 1998
BS EN 61345 1998
BS EN ISO 12224-1
BS EN 12338
BS EN 1981
BSI Shade chart BSI Shade chart
98/561739DC 98/561739DC
BS EN 60904-8 1998
BS EN 60904-10 1998
BS 7920
98/104723DC 98/104723DC
98/123044DC 98/123044DC
98/655985DC 98/655985DC
BS AU 50-1
PD 6636 1997
BS 7370-5
BS 1192-5
BS ISO 14740
BS ISO 14865
BS ISO 6344-2
BS EN ISO 12864
BS EN ISO 9341 1998
BS EN ISO 9340 1999
BS EN ISO 14534 1998
BS EN ISO 9338 1998
BS EN ISO 11401
BS EN ISO 11409
BS EN ISO 8987 Methods 835I & J
BS EN ISO 8989 1998, BS 2782-4 Method 451T 1998
BS EN ISO 11402
98/202793DC 98/202793DC
98/652420DC 98/652420DC
98/708084DC 98/708084DC
BS 7755-3
98/654081DC 98/654081DC
BS EN 658-1
DD ENV 1402-7
BS EN ISO 10344 1998
BS ISO 12647-3
BS EN ISO 14555
BS ISO/IEC 11584
BS ISO/IEC TR 11802-2
BS EN ISP 12064-1
BS 2782-5 Method 552A 1999, ISO 4582 1998
BS ISO/IEC 13642
BS ISO/IEC 8882-1
BS ISO/IEC 10022
BS EN 721
BS EN 1645-2
BS EN 1646-2
BS EN 12429
BS ISO 5270
PD 6633 1998
BS EN 2591-210
98/123104DC 98/123104DC
98/123103DC 98/123103DC
98/123102DC 98/123102DC
98/202745DC 98/202745DC
BS EN 2591-306
BS EN 2591-307
BS EN 2591-308
BS EN 2591-310
BS EN 2591-315
BS EN 2591-317
BS EN 2591-318
BS EN 2591-322
BS EN 2591-324
BS EN 2591-323
BS ISO/IEC 15802-5
BS ISO/IEC 13871
BS ISO/IEC 15773
BS ISO 15010
EP 511 EP 511
HB 10149 Special locations
98/262147DC 98/262147DC
98/710212DC 98/710212DC
98/541902DC 98/541902DC
BS EN ISO 10535
BS ISO 13218
BS ISO 6813
BS ISO 3290
BS IEC 61366-7
BS IEC 61366-6
BS IEC 61366-5
BS IEC 61366-4
BS IEC 61366-3
BS IEC 61366-1
BS EN 1330-5
BS A 328-1 1998
BS A 328-2 1998
BS EN 61558-2-1 1997
BS EN 61558-2-4 1997
BS EN 61558-2-6 1997
BS EN ISO 11609
BS EN 61558-2-17 1997
BS EN 12345
BS A 330 1998
BS A 329 1998
BS 4875-7
BS EN 3049
BS EN 3050
BS EN 754-7
BS EN 12482-2
BS EN 12482-1
BS EN 755-8
BS EN 755-7
BS EN 754-8
98/202942DC 98/202942DC
98/202941DC 98/202941DC
98/709278DC 98/709278DC
98/262167DC 98/262167DC
98/710272DC 98/710272DC
98/710280DC 98/710280DC
98/710273DC 98/710273DC
98/710275DC 98/710275DC
98/710276DC 98/710276DC
98/710277DC 98/710277DC
98/710328DC 98/710328DC
98/710327DC 98/710327DC
BS EN ISO 12944-1
BS EN ISO 12944-3
BS EN ISO 12944-4
BS EN ISO 12944-5
BS EN ISO 12944-6
BS EN ISO 12944-7
BS EN ISO 12944-8
BS EN ISO 12944-2
BS 3621
BS EN 1263-2
BS ISO 155
BS ISO 9982
BS EN 12432
BS ISO 7780 1998
BS EN ISO 13500
BS EN 12375
BS EN 12275
BS EN 12270
BS 3900-J10 1998
BS 3900-J12 1998
BS 7930-1
BS 6726
98/202995DC 98/202995DC
WD/98/202994DC WD/98/202994DC
98/123656DC 98/123656DC
WD/98/123662DC WD/98/123662DC
98/202985 98/202985
98/202993DC 98/202993DC
98/231416DC 98/231416DC
BS EN ISO 11640
BS EN ISO 11642
BS EN 12332-1
BS ISO 3764
BS 4401-1 1998
BS 5381-2 1998
BS EN 12078
BS ISO 15214
BS EN ISO 898-5
wd/HB10150
DISC PD 0005
WD/98/231469DC WD/98/231469DC
98/562192DC 98/562192DC
98/710404DC 98/710404DC
98/710405DC 98/710405DC
98/710406DC 98/710406DC
98/710407DC 98/710407DC
98/710408DC 98/710408DC
BS EN ISO 8092-1
BS EN ISO 8092-2
BS 7821-2
BS EN 1790
BS EN 60317-45 1998
BS EN 60617-12 1997
98/262328DC 98/262328DC
98/262326DC 98/262326DC
BS ISO 11783-3
BS ISO/IEC TR 13335-1
BS ISO/IEC TR 13335-2
BS EN 12276
BS EN ISO 10520
BS 7928
BS 7825-3
BS EN 50256
BS EN 2290-1
BS EN 60684-3-151 1998
BS EN 60684-3-212 1998
BS EN 60684-3-217 1998
BS EN 60684-3-228 1998
BS EN 60684-3-271 1998
BS EN 60679-5 1998
BS EN 60679-5-1 1998
BS EN 61076-4-100 1998, IEC 61076-4-100 1994,QC 480301XX0001 1994
BS EN 61076-4-101 1998, IEC 61076-4-101 1995,QC 480301XX0002 1995
BS EN 61076-4-105 1998, IEC 61076-4-105 1995,QC 480301XX0006 1995
BS EN 61108-2 1998
BS EN 61747-5 1998
BS EN ISO 10338 1998
BS EN 2564
BS EN 2597
BS EN 2560
BS EN 60318-1 1998
BS EN 61834-4 1998
BS EN ISO 9394
BS EN ISO 9339-1 1998
WD/98/123758DC WD/98/123758DC
98/645337DC 98/645337DC
98/123759DC 98/123759DC
BS 684-2
BS 4401-17 1998
BS EN ISO 10565 1998
BS 7211
98/618002DC 98/618002DC
BS EN 61788-1 1998
BS EN 60684-3-272 1998
BS EN ISO 3262-13
BS EN ISO 3262-9
BS EN ISO 3262-1
BS ISO 7772-1
BS EN 140402
BS EN 133221
BS EN 133201
BS EN 1403
BS EN 12132-1
BS EN 60684-3-218 1998
BS EN 1912
BS EN ISO 960
BS EN ISO 14918
BS EN 326-3
BS EN 1438
BS 7915
PD 6605-1
PD 6605-2
BS EN 60335-2-7
BS EN ISO 12870 1998
BS EN 60601-2-46 1998, BS 5724-2
BS EN ISO 7492
BS EN ISO 7551
PP 7312
BS 7908
BS AU 267
BS 1902-9
BS ISO 53
BS EN 61810-1 1998
BS EN 50067
BS EN 1111
BS EN 1794-1
BS EN 1794-2
BS ISO 5057
BS ISO 10525
BS EN 12466
98/232448DC 98/232448DC
98/123408DC 98/123408DC
BS A 331 1998
BS EN 61136-1
BS EN 60255-3
BS EN 60255-8
BS ISO 6768
BS ISO/IEC 13888-2
BS ISO/IEC TR 13335-3
BS ISO 13616
BS EN 1758
BS EN 60034-14
BS EN 534
BS EN 12568
BS EN 60034-22
BS EN 10257-1
98/203602DC 98/203602DC
98/542413DC 98/542413DC
98/542414DC 98/542414DC
BS EN 60264-3-5 1996
BS EN 61290-2-2 1998
BS EN 61290-2-3 1998
BS EN 61290-6-1 1998
BS EN 61300-3-23 1998
BS EN 61290-7-1 1998
98/712122DC 98/712122DC
BS ISO 10372
BS EN 1818
BS EN 1652
BS EN ISO 3262-2
BS EN ISO 3262-3
BS EN ISO 3262-4
BS EN ISO 3262-5
BS EN ISO 3262-6
BS EN ISO 3262-7
BS EN 544
BS EN 1782
BS EN 60669-2-3 1997
DISC PD 2000-1
BS ISO 14681
98/203673DC 98/203673DC
98/711551DC 98/711551DC
98/711552DC 98/711552DC
DD ENV ISO 10722-1
BS EN 12244-2
BS EN 12105
BS ISO 7176-8
BS EN ISO 140-4
BS EN ISO 140-5
BS EN ISO 140-6
BS EN ISO 140-7
BS ISO 7746
DD ENV 1545-1
BS ISO/IEC 14662
DD ENV 12922-1
DD ENV 12610
DD ENV 12052
DD ENV 12264
DD ENV 12538
DD ENV 12160
DD ENV 12539
wd/HB10151 (IEE ON-SITE GUIDE) wd/HB10151 (IEE ON-SITE GUIDE)
BS EN ISO 8583-2
BS EN ISO 8583-3
DD ENV 1545-2
DD ENV 12537-2
DD ENV 12612
DD ENV 12623
DD ENV 12611
DD ENV 12537-1
DD ENV 12967-1
98/712226DC 98/712226DC
BS EN 677
BS 5760-8
BS 7909
BS EN 307
BS EN 1048
BS EN 2781
BS 1113
BS EN ISO 3170
BS EN 10213-1
BS EN 10213-3
PD 12700
PD 13058 1997 and NEMA PS 3 Supplement 10
BS 6068-6
BS EN 4258
BS ISO 10303-47
BS ISO/TR 10303-12
BS ISO TR 11974
98/562597DC 98/562597DC
BS 9450
BS EN 12393-1
BS EN 12393-2
BS EN 12393-3
BS EN 61280-1-1 1998
BS EN 61290-1-1 1998
BS EN 61290-1-2 1998
BS EN 61290-2-1 1998
BS EN 61291-1 1998
98/712294DC 98/712294DC
BS EN ISO 6520-1
BS EN 12522-1
BS EN 12522-2
BS 4401-18 1998
BS 91
98/710674DC 98/710674DC
BS 3900-D11 1998
BS EN 1332-2
BS EN ISO 10644
BS EN ISO 10202-3
BS ISO 10202-5
BS ISO 10202-8
BS ISO/CIE 10526
BS ISO/CIE 10527
BS ISO 11568-4
BS ISO 11568-5
BS ISO 11833-1
BS ISO 13491-1
BS ISO 13492
98/231704DC 98/231704DC
98/231705DC 98/231705DC
98/231706DC 98/231706DC
98/231788DC 98/231788DC
98/562858DC 98/562858DC
98/711865DC 98/711865DC
98/713264DC 98/713264DC
BS EN 1527
BS EN 1670
BS EN 50015
BS EN 50017
BS ISO 11612
BS 131-6
BS 131-7
BS EN 60360 1998
BS EN 61280-2-4 1998
BS EN 61280-2-5 1998
BS EN 61290-1-3 1998
98/712790DC 98/712790DC
98/203711DC 98/203711DC
98/402645DC 98/402645DC
98/231835DC 98/231835DC
BS EN 12213
BS 684-2
BS EN 12561-1
BS 3969
BS 7378-3
BS AU 50-1
BS ISO 2704
BS EN 12645
BS ISO 5834-1
BS ISO 5834-2
BS ISO 15374
BS EN 12244-1
BS EN 10283
98/654176DC 98/654176DC
BS EN 1953
BS EN ISO 14727
BS EN 1330-1
BS EN 1330-2
BS QC 300300 1998
BS AU 50-1
BS EN 12374
BS EN 12377
BS ISO/TR 12470
98/562995DC 98/562995DC
98/563123DC 98/563123DC
BS EN ISO 11980 1998
BS EN ISO 9000-3
BS EN ISO 9073-7
BS EN ISO 9073-8
BS EN ISO 9073-9
BS EN ISO 9913-1 1997
BS ISO 7858-1
BS EN 1739
98/645916DC 98/645916DC
98/645278DC 98/645278DC
98/563030DC 98/563030DC
98/124129DC 98/124129DC
BS EN 888
BS EN 889
BS EN 890
BS EN 891
BS EN 896
BS EN 897
BS EN ISO 11909 1996
BS EN ISO 294-3 1998, BS 2782-9 Method 910D 1997
BS EN ISO 294-4 1998, BS 2782-9 Method 910E 1997
98/232114DC 98/232114DC
BS EN 12526
BS EN 12533
BS EN 12532
BS EN 12531
BS EN 12530
BS EN 12529
BS EN 12528
BS EN 12527
BS EN 1093-1
BS 2081-1
BS 2081-2
BS EN 61188-1-2 1998
BS EN ISO 10093
BS ISO 13726
WD/HB10152
BS ISO/IEC 8473-2
BS ISO/IEC ISP 12067-1
BS ISO/IEC ISP 12067-3
BS ISO/IEC ISP 12067-4
BS ISO/IEC ISP 12067-5
BS EN 60204-1 1997
BS EN ISO 11715-1
BS 6356-12 1996
BS EN ISO 13427
BS EN ISO 13437
BS EN 50056
BS EN 50058
BS EN 50104
BS 7933-1
98/263175DC 98/263175DC
98/263163DC 98/263163DC
98/714098DC 98/714098DC
98/563068DC 98/563068DC
98/124343DC 98/124343DC
98/563592DC 98/563592DC
98/124342DC 98/124342DC
98/713856DC 98/713856DC
BS ISO 2534
BS ISO 12232
BS EN 60118-4 1981
BS ISO 4782
BS EN ISO 8598
BS EN ISO 4674-2
BS EN ISO 2535
BS EN ISO 11908
BS EN 140
BS EN 12439
BS EN 13220
BS EN 12396-1
BS EN 12396-2
BS EN 933-9
BS EN 772-3
BS EN 772-7
BS EN 772-4
BS ISO 254
BS ISO 15078
BS 3900-A10 1998
BS Z 13 1998
BS Z 14 1998
BS EN 2591-402
BS EN 2591-406
BS EN 2591-408
BS EN 2591-410
BS EN 2591-403
BS EN 2591-404
BS EN 2591-405
BS EN 2591-411
BS EN 2591-414
BS EN 2591-413
BS EN 2746
BS EN 2747
BS EN ISO 9342
BS EN 1938
BS EN ISO 1628-1 1998, BS 2782-7 Method 732A 1998
BS EN ISO 7711-1
BS 2738-1
BS ISO/IEC 7942-4
PD 6608 1998
BS EN ISO 3175-1
BS EN ISO 3175-2
BS EN 50057
BS EN 61491
BS ISO 13964
BS CISPR 16-1 1998
98/263369DC 98/263369DC
98/563529DC 98/563529DC
BS ISO 2144
BS ISO 2471
BS EN ISO 6186
BS EN 60110-1 1998
98/714181DC 98/714181DC
98/714182DC 98/714182DC
98/714183DC 98/714183DC
98/714184DC 98/714184DC
BS EN 1052-1
98/714957DC 98/714957DC
98/714950DC 98/714950DC
98/714949DC 98/714949DC
98/263364DC 98/263364DC
98/263365DC 98/263365DC
98/232369DC 98/232369DC
98/232370DC 98/232370DC
WD/98/263430DC WD/98/263430DC
98/232371DC 98/232371DC
BS EN ISO 9020 1996
BS ISO 690-2
BS ISO 10054
BS EN ISO 14184-2
BS EN 1015-7
BS EN 1015-4
BS EN 1982
BS EN 1971
HB 10153
WD/HB10154 – MEASUREMENT FOR QA TO ISO90 WD/HB10154 – MEASUREMENT FOR QA TO ISO90
HB 10155
HB 10156
BS ISO 7654
BS EN ISO 10846-2
BS EN ISO 10846-1
BS EN ISO 5135
BS 7378-1
BS EN ISO 1675 1998, BS 2782-6 Method 620E 1998
BS EN ISO 5350-2
BS EN ISO 5350-1
BS ISO 2846-1
BS ISO 11631
98/713703DC 98/713703DC
98/713704DC 98/713704DC
98/713707DC 98/713707DC
BS 684-1
98/714353DC 98/714353DC
98/563717DC 98/563717DC
98/563716DC 98/563716DC
98/124700DC 98/124700DC
98/107841DC 98/107841DC
98/712457DC 98/712457DC
98/712458DC 98/712458DC
98/232405DC 98/232405DC
98/263625DC 98/263625DC
BS EN 60871-1 1997
BS EN 1196
BS EN 61800-2 1998
BS ISO 7588-1
BS AU 50-1
BS ISO 1203
BS EN 2943
BS EN 12844
BS EN 1559-6
BS 5400-10C
BS EN 10140
PAS 022
BS ISO/IEC 15899
98/714584DC 98/714584DC
98/714585DC 98/714585DC
BS EN ISO 9339-2 1998
BS EN ISO 4045
BS EN ISO 4044
BS EN ISO 4047
BS EN ISO 4048
BS EN ISO 5399
BS EN ISO 11643
BS EN ISO 11646
BS ISO 4664
BS ISO/IEC 13522-6
BS EN 957-1
BS EN 750
BS EN 749
BS EN 748
BS EN 2913
BS ISO 12240-1
BS ISO 12240-2
BS ISO 12240-3
BS EN 480-11
BS EN 61724 1998
BS EN 61829 1995
BS EN 61277 1995
BS ISO 11090-2
BS ISO 10242-1
98/263639DC 98/263639DC
BS ISO 6020-1
BS IEC TR 60825-5
BS ISO 12222
BS EN 12190
BS EN ISO 14041
PAS 26
BS EN 1243
BS EN 1245
BS ISO/IEC 10173
BS EN 1348
BS EN 1308
BS EN 1322
BS EN 1323
BS EN 1324
BS EN 1346
BS EN 1347
BS EN 1720
BS EN 60534-3-3 1998
BS EN 61061-3-1 1998
BS EN 60455-1 1998
BS EN 31
BS EN 1884
BS EN 1933
BS EN 160101
BS EN 1882
BS EN 1883
BS EN 50157-1
BS EN 50083-4
98/263688DC 98/263688DC
BS EN 61760-1 1998
BS EN 61191-1 1998
BS EN 61191-3 1998
BS EN 61191-4 1998
BS EN 61747-4 1998
BS EN 61174 1998
BS EN 61162-2 1998
BS EN 61558-2-8 1998
BS EN ISO 4629 1996
BS 7931
98/711347DC 98/711347DC
BS EN 12472
BS EN ISO 9703-3
BS EN 10271
BS EN 10268
BS 7499
BS EN ISO 3681 1996
BS EN ISO 3682 1996
BS 6914-6 1998
BS EN 60601-2-8 1998, BS 5724-2
BS EN 61835 1998
BS ISO 6073
BS ISO 4404
BS EN 1721
BS EN 1719
BS EN 60335-2-84 1999
BS EN 61834-5 1998
BS EN 61834-2 1998
BS EN 60286-6 1998
BS EN 61400-11 1998
BS EN 60318-3 1998
BS EN 60318-2 1998
BS ISO 13994
BS ISO 14258
DD ENV ISO 14906
BS EN 1841
BS 4110
BS 2869
98/402891DC 98/402891DC
98/715998DC 98/715998DC
BS ISO 1998-2
BS ISO 1998-3
BS ISO 1998-4
BS ISO 1998-7
BS EN 12006-3
BS Z 15 1998
98/124702DC 98/124702DC
98/563860dc 98/563860dc
98/563870DC 98/563870DC
98/637094DC 98/637094DC
BS EN 144-2
BS EN 60320-2-2
BS EN 60799 1998
BS EN 60870-6-701 1998
BS EN 60870-6-702 1998
BS ISO 9518
BS IEC 60874-10-1
BS IEC 60874-10-2
BS EN 32
BS EN 36
BS EN 37
BS EN 111
BS EN ISO 14501
BS EN 33
BS ISO/IEC 12087-5
BS ISO/IEC 9798-3
WD/BSEN1253-2
98/714826DC 98/714826DC
98/125098DC 98/125098DC
BS 3424-38
BS IEC 60874-14-3
BS IEC 60874-14-4
BS IEC 60874-14-5
BS EN 61300-3-4 1998
BS ISO/IEC 13888-1
BS ISO/IEC 13888-3
BS ISO/IEC 10118-3
BS EN 13187
BS IEC 61163-2
BS ISO/IEC 9796-2
BS ISO/IEC 9798-1
BS ISO/IEC 10116
PAS 30
BS 7870-5
BS 5607
BS ISO 8529-3
BS ISO 4010
WD/PD1999-2
98/232904DC 98/232904DC
98/264040DC 98/264040DC
98/263776DC 98/263776DC
BS EN 61897 1998
BS EN 61854 1998
PD 6519-3 1998
DD ENV 13258
98/232799DC 98/232799DC
98/232800DC 98/232800DC
98/232801DC 98/232801DC
98/232802DC 98/232802DC
98/232803DC 98/232803DC
98/232804DC 98/232804DC
98/232805DC 98/232805DC
98/232806DC 98/232806DC
98/232807DC 98/232807DC
98/232808DC 98/232808DC
98/232809DC 98/232809DC
98/264130DC 98/264130DC
98/645464DC 98/645464DC
DISC PD 2000-4
BS SP 172 1998
BS EN 1540
BS EN 10149-3
BS EN 1876-1
BS EN 1466
BS EN 1281-1
BS 5728-7
BS IEC 60050-195
BS ISO 7588-3
BS ISO 7588-2
BS EN 12654-3
BS EN 12654-2
BS EN 12654-1
BS 5766-10 1998
BS ISO 1012
BS IEC TR 61334-5-2 1998
BS EN 61334-4-61 1998
BS EN 61334-4-33 1998
BS ISO 11933-3
BS EN 60204-32 1998
BS EN 61191-2 1998
DD ENV 1402-3

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal for ASTM Standards

Search & Listing Portal for ISO Standards

Search & Listing Portal for IEC Standards

Search & Listing Portal for BSI Standards

Search & Listing Portal for DIN Standards

Cheapest Original BSI Standards 2-12000

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal

for ASTM Standards

Search & Listing Portal

for ISO Standards

Search & Listing Portal

for IEC Standards

Search & Listing Portal

for BSI Standards

Search & Listing Portal

for DIN Standards

PD ISO/TR 15489-2
BS EN 12098-2
BS EN ISO 11135-1
BS EN 60371-1
BS EN 60715 2001, IEC 60715 1981+A1 1995
BS EN ISO 14895
PD ISO/IEC TR 9126-4
ISO10483-1 High-side intelligent power switch
BS EN ISO 17665-1
BS ISO/IEC 14756
BS EN 14784-1
BS EN 14784-2
BS EN 61788-5
BS ISO 10553
BS ISO 11442-5
BS EN ISO 11137-1
BS EN 61558-2-1
BS EN 60512-11-7
BS EN 1992-1-2
BS EN 60512-11-14
BS EN 1997-1
BS EN 61643-341
BS EN 60068-2-43
BS EN 60068-2-42
BS ISO 18926
BS EN 61746 2001
BS EN 60534-5
BS ISO/IEC 13249-3
BS ISO/IEC 13249-5
ISO5000
BS EN 61086-3-1
BS EN 60641-2
BS EN ISO 16048
BS ISO 764
ISO16978
ISO16979
ISO16981
ISO16983
ISO16984
ISO16985
ISO16998
ISO16999
BS EN 13356
BS ISO 6145-5
BS ISO 6145-7
BS ISO 6145-9
ISO/TR12391-4 Flawed cylinder cycle test
BS EN 13701
DD ENV 1090-6
BS EN ISO 11114-4
BS EN ISO 11137-2
BS ISO 1206
BS EN 60998-2-2
BS EN 62199
BS EN 13150
BS EN 61300-1
BS EN 60137
BS 2846-8 2001
BS EN ISO 15027-1
KIT 79 KIT 79
BS EN ISO 15027-2
BS EN ISO 15027-3
BS ISO 12637-5
BS EN ISO 13998
BS EN 60958-3
BS EN 61883-1
BS EN 60268-4
BS 5655-6
BS EN 50266-1
BS EN 1304
BS EN 13280
BS EN 539-1
BS EN 539-2
BS ISO 1268-7
ISO22654
BS EN 534
BS EN 14782
ISO15673
ISO20865
BS EN 14783
BS EN ISO 3892
BS EN 14437
BS EN 721
BS EN 13211
BS EN 12701
ISO/IEC8825-4 XML Encoding Rules (XER) (Common text ve
BS ISO 17359
BS ISO 10109-11
BS EN 14177
BS EN 14150
BS EN 722-1
BS EN 1648-1
BS EN 14176
BS EN 1648-2
BS EN 13385
BS EN 61669 2001
BS ISO 12368
BS ISO 17493
BS EN 1089-2
ISO3581
BS EN 1089-3
BS EN 1149-3
DD ENV 1565-2
KIT 80 KIT 80
BS ISO 22972
BS EN 326-3
BS EN ISO 1520
BS EN ISO 407
BS EN ISO 15496
BS EN ISO 16931
BS EN 14141
BS EN ISO 16148
BS EN 3748
PD IEC TR 62283
BS EN 61834-10 2001
BS EN 13110
EP 220 EP 220
KIT 81 KIT 81
KIT 82 KIT 82
BS ISO 19378
BS EN ISO 10297
BS EN 1504-8
BS AU 50-4
DD ENV 1519-2
BSISO15360-1 Visual method
DD ENV 1451-2
DD ENV 1455-2
DD 245
BS EN 14211
BS ISO/IEC 20970
BS ISO 15360-1
BS EN 14212
BS ISO 15361
BS EN 14137
BS EN 14142-1
BS 7799-2
BS EN 14155
BS EN 14157
BS EN 14156
BS EN 14158
BS EN 14147
BS EN 14146
ISO11898-4 Time-triggered communication
CWA 14191
CWA 14193
DD ENV 14138
BS EN 39
BS EN 62093
BS EN 62068-1
BS EN 14106
BS ISO/IEC 15504-4
BS ISO TR 9705-2
KIT 83 KIT 83
BS EN 1262
BS EN 14222
BS 684-2
BS ISO 10294-4
BS ISO 5658-4
PD ISO/TR 18930
PD ISO/TR 18931
BS EN ISO 14921
BS EN 60335-2-105
BS EN 62153-4-2
DD IEC PAS 61754-19 2001
DD IEC PAS 61754-20 2001
BS ISO 105-X16
DD IEC PAS 61754-18 2001
BS ISO 11476
DD ENV 12625-8
BS EN 50117-3-1
BS 1892-3
BS EN 3567-001
BS EN ISO 2815 2003
BS EN 62070
BS ISO/IEC 18019
DD IEC/PAS 62260 2001
BS EN ISO 11446
BS ISO 16366
BS EN 61000-4-23 2000
BS EN 61904 2000
BS ISO 11843-3
BS ISO 11843-4
BS EN 858-2
BS EN 1825-2
BS EN ISO 13406-2
BS EN 50325-1
BS EN 50325-4
BS EN 13467
BS EN 3567-003
BS EN 3567-004
BS EN 13468
BS EN 13469
BS EN 13470
BS ISO 4659
BS EN 13471
BS EN 13472
PP 8888-1 2001
BSISO/IEC13522-7 Interoperability and confo
BSISO/IEC13522-7
ISO301
DD ENV 50354
BS EN 12875-2
BS ISO 10540-3
DD CEN/TS 14429
BS EN 4324
01/105090 DC 01/105090 DC
BS EN 840-1
DD IEC TS 62143
BS EN 2591-601
BS EN 2591-602
BS EN 2591-604
BS EN 2591-610
BS EN 2591-611
BS EN 840-2
BS EN 2591-612
BS EN 2591-615
BS EN 2591-6101
BS EN 840-3
BS EN 2591-6301
BS EN 2591-6303
BS EN 2591-6305
BS EN 2591-6306
BS EN 2591-6307
BS EN 840-4
BS EN 2591-6314
BS EN 61828 2001
BS EN 2591-6315
BS EN 840-5
BS 1566-1
BS 5906
BS EN 2591-6316
BS EN ISO 15695
PD IEC/TR 61000-1-4
BS ISO/IEC TR 13335-5
BS EN 12759
BS EN 4340
BS EN 12871
BS EN 13650
BS EN 13651
BS EN 13652
BS EN 13654-1
BS ISO/IEC TR 15580
BS EN 14216
BS EN 197-4
BS IEC 60736
PD IEC TR 61354 1995
PD IEC TR 62056-41 1998
BS EN 60825-12
PD IEC TR 62056-51 1998
PD IEC TR 62056-52 1998
BS EN ISO 10350-2
BS EN 9132
BS EN 61966-2-2
BS EN 14144
BS EN 12216
BS EN 14145
BS ISO 19078
BS EN 13981-3
BS EN 13981-4
BS EN 1186-1
DD 254
BS EN 61305-5
04/30050436 DC 04/30050436 DC
BS EN 60191-6-5 2001
BS EN ISO 22610
BS EN ISO 7291
BS EN ISO 22612
BS EN 1186-12
BS EN 1186-2
BS EN 1186-3
BS EN 1186-4
BS EN 1186-5
BS EN 1186-6
BS EN 1186-7
BS EN 1186-8
BS EN 1186-9
BS EN 12765
BS EN 62012-1
BS ISO/IEC TR 15581
BS EN 4165-017
BS EN 204
BS EN 4165-016
BS EN 4165-013
BS EN 1792
DD IEC PAS 62255-1
ISO17643
BS EN 4165-022
BS EN 4165-015
BS EN ISO 3071
BS EN 13397
BS EN 4165-012
BS EN 4165-014
BS EN 13200-1
BS EN 12766-2 2001
BS EN 2591-415
PD CEN/TR 14633
BS EN 14610
BS EN 2591-502
BS EN 586-3
AMD13309(TO BSISO/IEC14651
BS EN 2591-503
AMD13309(TO BSISO/IEC14651
BS EN 2591-505
WD/BSISO/IEC14651
BS EN 2591-506
BS ISO/IEC 14651
WD/BSISO/IEC14651
BS EN 2591-416
BS EN 50375
BS EN 2591-417
BS EN 2591-418
BS EN 2591-419
BS EN 2591-420
BS EN 2591-424
BS EN 2591-425
BS EN 13274-4
BS EN 2591-426
BS EN 61334-5-1 2001
BS EN 2591-427
BS EN 2591-701
BS EN 2591-702
BS EN 2591-703
BS EN 2591-704
BS EN 2591-705
BS EN 2591-706
BS EN 2591-708
BS EN 2591-709
BS EN 2591-7301
BS EN ISO 16136
BS EN ISO 16137
BS EN ISO 16138
BS EN ISO 21787
BS EN 12474
BS EN 12447
BS EN 60601-2-45 2001, BS 5724-2
BS EN 1375
BS EN 61663-2 2001
DD ENV 1401-3
ISO9712
DD ENV 820-4
BS EN ISO 16135
BS EN 13757-2
BS ISO 10838-1
BS EN 13757-3
BS ISO 18653
BS EN 13625
BS EN 13192
BS ISO 10838-2
BS ISO 10838-3
BS EN 14115
DD ENV 1329-2
BS EN ISO 4257 2001
BS EN 60974-8
BS EN 50144-2-10
BS EN ISO 21549-3
BS EN ISO 21549-1
BS EN 12819
BS EN 12820
BS EN ISO 21549-2
BS ISO 10110-14
BS EN 13448
BS EN 62005-7
BS ISO 10109-12
BS ISO 18913
PD ISO/TR 14999-1
BS ISO 15319
BS EN 235
BS EN ISO 3838 2004
BS EN 14199
BS EN 61280-4-1
BS ISO 1268-5
BS 15000-1
ISO18245
ERROR (WAS COR1 TO BSEN60598-1 General requirements and tests
BS EN 1361
KIT 84 KIT 84
BS EN 10306
BS EN 10307
BS EN 10308
BS EN 12175
BS EN 12174
BS EN 1252-2
BS 8421-1
BS 8401
BS ISO 11462-1
BS EN 1844
BS EN 50344-1
BS EN 12255-1
BS EN 12255-6
BS EN 12255-7
BS EN 12509
BS EN 12465
BS EN 14181
BS EN 13084-2
BS EN ISO 1514 2004
BS EN 13109
BS EN 12511
BS EN 12979
BS EN 12479
BS EN 14201
BS EN 14202
BS EN 321
BS EN 14203
BS EN 14218
BS ISO 15686-7
BS EN 61982-3 2001
BS EN 61834-7 2001
CWA 14228
BS EN 14196
BS EN 14187-1
BS EN 14187-2
BS EN 14187-3
BS EN 14187-4
BS EN 14187-5
BS EN 14187-6
BS EN 14187-7
BS EN 14187-8
BS EN 14227-1
BS EN 14227-2
BS EN 14227-3
BS EN 14227-4
BS IEC 61000-6-6
BS ISO 4656
BS ISO 16016
BS ISO 8084
BS EN 60730-2-5
BS EN 12274-7
BS EN 755-9
BS ISO 5893
BS 7982
EN14175-3 Type test methods
BS EN 14175-3
BS 7997
BS ISO 2330
BS EN 62148-6
BS EN 62148-11
BS EN 62148-1
DD ENV 12038
BS EN 1748-1-2
BS EN ISO 16284
BS EN 1748-2-2
BS EN 14178-2
BS EN 50377-6-1
BS 6002-4 2006
ISO3951-2 General specification for single sampling plans indexed by acceptance quality l
BS 5703-1
BS 5703-2
DD ENV 14062-1
DD ENV 14062-2
BS 5703-4
BS 5703-3
HB 10194
HB 10190
KIT 85 KIT 85
KIT 86 KIT 86
KIT 87 KIT 87
BS EN 14206
ISO/IEC15938-1 Systems
BS EN 60322 2001
BS EN ISO 14020
BS 7121-2
BS 7121-5
PD 8010-2
BS EN ISO 16654
BS ISO 105-A08
BS EN 50125-2
BS EN 50125-3
BS EN ISO 7786
BS EN 50318
BS EN 60077-4
BS EN 60077-5
BS EN 61377-2
DD CLC/TS 62046
BS ISO 9198
BS ISO 777
BS ISO 778
BS ISO 779
HB 10193
BS EN ISO 9001
BS ISO 19921
BS ISO 19922
BS 7121-14
BS EN 60077-2
BS EN 60077-1
BS 5499-1
BS 5701-1
BS 350
BS ISO 128-34
WD/BSISO/IEC9075-9
WD/BSISO/IEC9075-9
BS EN 12670
BS EN 772-14
BS ISO 1986-1
BS EN 14197-1
BS EN 1515-2
BS ISO 4715
BS ISO 5991
BS ISO 8432
BS ISO 11021
BS ISO 1202
BS ISO 1271
BS ISO 1272
BS ISO 1279
BS ISO 3793
BS ISO 3794
BS ISO 4096
BS ISO 7660
BS ISO 11023
BS ISO 14714
BS ISO 1241
BS 3900-J13 2001
CWA 14168
PD CLC/TR 50373
BS ISO 9186
BS EN 12255-9
BS ISO 11076
BS 6806
ISO20019
BS EN ISO 6402-1
BS EN 9200
PD CR ISO 17663
BS EN 10264-1
BS EN 10264-2
BS EN 10264-3
BS EN 10264-4
BS EN 14210
BS 7998-3 2002 Version 1, HD 245
DD ENV 1566-2
BS 1203
BS ISO 16014-4
BS ISO 8528-1
ISO/IECTR14475
BS EN 14225-3
BS EN 14225-4
BS EN 772-5
BS EN ISO 10651-2
BS EN ISO 10651-6
CWA 14172-2
CWA 14172-1
CWA 14171
CWA 14170
CWA 14169
CWA 14243-1
BS ISO 12231
BS ISO/IEC TR 10176
BS EN 4325
BS EN 4608-001
BS EN ISO 18779
BS EN 4608-002
BS EN ISO 18778
BS ISO 12353-2
DD ENV 12923-2
BS ISO 15859-1
BS ISO 15859-2
BS ISO 15859-3
BS ISO 15859-4
BS ISO 15859-5
BS ISO 15859-6
BS ISO 15859-7
BS ISO 15859-8
BS ISO 6145-2
BS ISO 15859-9
BS ISO 15859-10
BS ISO 15859-11
BS ISO 15859-12
BS ISO 15859-13
BS EN 13313
PD 0023
KIT 88 KIT 88
ISO/IEC8859-16 Latin alphabet No
PD CR 14245
BS EN 12836
BSISO/IEC13522-8
BS ISO/IEC 13522-8
BS EN ISO 12894
BS EN ISO 14596 1998
BS 7986
PD CEN/TR 15019
PD IEC TR 61282-7
BS EN 12814-4
BS EN 13417-1
BS EN 13417-2
BS EN 13417-3
BS EN 61834-9
PD CR 14473
BS EN 60747-15
BS EN 60747-16-10
BS EN 12098-3
BS EN 14682
BS EN 13180
BS EN 2591-707
BS EN 2591-509
BS EN 2591-508
BS EN 2591-6317
BS EN 2591-6318
BS EN 2591-6324
BS EN 2591-6401
BS EN 2591-6402
PD CR 13445-7
BS EN 2591-6403
BS EN 2591-6404
BS EN 2591-6405
BS EN 2591-6406
BS EN 2591-6414
BS EN 2591-6415
EP 210 EP 210
WD/ISO/IECTR11802-1
WD/ISO/IECTR11802-2
BS EN 3475-100
BS EN 3475-201
BS EN 3475-202
BS EN 3475-301
BS EN 3475-302
EP 915 EP 915
BS EN 13535
BS EN 62083 2000
BS EN 61280-2-9
KIT 89 KIT 89
PD IEC TR 61282-6
PD IEC TR 61282-2
ISO7240-4 Power supply equipment
BS ISO/IEC 90003
BS ISO 15628
BS EN 3475-303
BS EN 3475-304
BS EN 3475-305
BS EN 3475-401
BS EN 3475-402
BS EN 3475-403
BS EN 3475-404
BS EN 3475-405
BS EN 3475-406
BS EN 3475-407
BS EN 3475-409
BS EN 3475-410
BS EN 3475-501
BS EN 3475-502
BS EN 3475-503
BS EN 3475-504
BS EN 3475-505
ISO/IEC11179-5 Naming and identification principles
BS EN 3475-506
BS EN 3475-507
BS EN 3475-701
BS EN 3475-702
BS EN 3475-703
BS ISO/IEC 14496-8
BS EN ISO 8384
BS EN 61788-4
BS ISO 14500
BS EN 14223
BS EN 12750
BS EN 14224
BS EN 13052-1
BS EN 957-9
BS EN 13402-3
BS EN 61300-3-37
BS EN 12271-3
BS EN 12272-1
BS EN 12274-1
BS EN 12274-3
BS EN 12274-6
DD CEN/TS 14507-2
BS ISO 13953
04/30055611 DC 04/30055611 DC
BS EN 61286
BS EN 12253
BS EN 13372
BS EN 50065-1
BS EN 843-4
BS 6001-5
BS ISO 15489-1
BS ISO 17386
DD CEN/TS 1071-7
BS ISO/IEC 15474-1
BS EN 62258-1
BS ISO 19238
PD 0028
CWA 14247
CWA 14174-1
CWA 14174-2
BS EN 556-2
ISO15228
BS EN ISO 7500-1
BS EN 13383-2
CWA 14174-3
CWA 14174-4
CWA 14174-5
CWA 14174-6
CWA 14174-7
CWA 14174-8
BS ISO 8529-1
CWA 14248
BS EN 14438
BS EN 1367-5
BS EN ISO 10360-1
BS EN ISO 10360-3
BS EN ISO 10360-5
BS EN 61108-4
BS IEC 61097-2
DD 8431
BS ISO/IEC 8632-3
BS EN ISO 11064-2
BS EN 957-6
BS EN 820-3
HB 10191
BS ISO/IEC 8632-4
BS ISO/IEC 8651-4
BS ISO/IEC 7942-1
BS ISO/IEC 8806-4
BS ISO 8805
BS 8204-1
BS ISO 17612
BS 8204-2
BS 8204-3
BS 8204-4
BS 8204-5
BS ISO 19018
BS EN 867-5
BS EN 61314-1
BS ISO 16049-1
BS EN ISO 81714-1
DD ENV ISO 14907-1
BS EN 13274-3
BS EN 61000-4-21
BS EN ISO 19900
BS ISO 15663-3
BS EN 71-2
BS EN ISO 6165 2002
ISO/IEC11582
ISO/IEC21989
BS EN ISO 16017-1
ISO/IEC21990
ISO/IEC21991
BS EN 14240
BS 8404
BS EN 1052-5
BS EN 13012
BS ISO 3160-2
BS EN 14239
BS ISO 14728-1
BS ISO 14728-2
BS EN 12501-1
BS EN 12502-1
BS EN 12501-2
BS EN 12502-2
BS EN 12502-3
HB 10196
HB 10197
HB 10198
BS EN 12502-4
BIP 2053
BS ISO 11461
PAS 46
BS ISO 11357-5
ISO9564-3 PIN protection requirements for offline PIN handling in
BS EN 61347-2-11 2001
WD/ISO/IECTR21000-1 Vision, technologies and Strategy
WD/ISO/IEC21000-2 Digital Item Declaration
ISO/IEC21000-4 Intellectual Property Management and Protection (IPMP)
BS EN 13622
BS ISO 10071-1
HB 10200
HB 10201
BS EN ISO 5349-2
PD CR 14269
DD ENV 1993-1-3
BS ISO/TR 12391-1
BS EN 62148-5
ISO/IEC14496-3 Audio
BS 7821-6 2002
BS ISO 21287
PD CLC/TR 61158-1
BS ISO 19379
BS EN 61784-1
KIT 90 KIT 90
BS EN 170101
ISO16844-2 Recording unit, electrical interfaces
BS EN 50281-3
BS EN61215
ISO16844-3 Motion sensor interface
ISO16844-4 CAN interface
ISO16844-6 Diagnostics
ISO16844-7 Parameter
ISO16844-5 Secured CAN interface
PD 60065
DD CEN ISO/TS 17574
BS ISO 4064-2
BS EN 61334-4-512 2001
BS EN 14160
BS EN 13182
BS EN 60375
PD ISO/TR 22971
ISO5366-3 Paediatric tracheostomy tubes
BS EN 13205
BS EN 60519-6
BS EN 60519-10
BS EN ISO 15927-5
BS EN ISO 1559
BS EN 1929-4
BS EN 1929-7
BS EN 1929-3
BS EN 60519-1
DD ISO/TS 16649-3
BS ISO 22029
DD CLC/TS 50398
BS ISO 14368-2
BS ISO 14368-3
BS EN 133
BS 7668
DD ISO/TR 15969
BS ISO/TR 12391-2
BS EN ISO 14877
EP 526
EP 206 EP 206
BS EN 14242
BS IEC 60748-23-4
BS EN 14481
BS EN ISO 5356-1
BS EN 60947-5-4
DD ENV 737-6
PP 8888-2 2000
PP 8888-2 2000
BS EN 61249-2-8
BS EN 61249-2-9
BS EN 14161
DD ENV 1993-1-2
BS EN 61249-2-21
BS EN ISO 9333
BS EN 60230
BS EN ISO 22374
BS ISO/IEC 8652
BS ISO/TS 13725
BS ISO 10300-2
BS EN 13061
BS ISO 15368
BS ISO 16269-6
PD IEC/PAS 62276
PD IEC/PAS 62277 2001
BS EN 771-6
BS EN 61280-1-4
ISO2896
BS EN 61290-10-3
BS EN 61290-11-1
BS EN 62148-10
BS EN 62148-7
BS EN 62148-8
BS EN 62148-9
BS EN 62149-4
BS ISO 10300-3
EP 230 EP 230
PD ISO/TS 16431
BS ISO/TR 14179-2
BS ISO 9083
BS ISO/TR 14179-1
ISO11898-1 Data link layer and physical signalling
ISO11898-2 High-speed medium access unit
BS EN 1804-1
BS EN 1804-2
BS ISO 6497
BS 8504-1
BS ISO 18928
BS EN 1297
BS ISO 17724
BS ISO 12006-2
BS 5852
BS EN 161
WD/ISO/IEC9594-1 Overview of concepts, models and services
ISO/IEC9594-2
ISO/IEC9594-3 Abstract service definition
BS EN 10263-2
BS EN 10263-3
ISO/IEC9594-4 Procedures for distributed operation
BS EN 10263-5
BS ISO 15373
ISO13849-2 Validation
BS EN 13294
BS EN 13395-1
BS EN 13395-2
BS EN 13395-3
DD ISO/TS 21748
DD ISO/TS 21749
BS EN 50153
BS EN 13486
KIT 91 KIT 91
BS EN 10244-2
BS EN ISO 15749-1
PD 6680
BS EN 12004
BS EN 61300-2-47
KIT 92 KIT 92
BS 3936-4
BS 6465-1
BS EN 50050
BS EN 13506 2002
BS EN 1186-11
BS EN 1186-10
BS EN 13484
BS EN 1186-15
BS ISO 13528
BS EN 1186-13
BS EN 1186-14
DD ENV 302-5
BS EN 1443
BS EN ISO 9227
BS EN ISO 10308
BS EN 14278-1
BS EN 14278-2
BS EN 12436
BS EN 14278-3
BS EN 14533
BS ISO 6533
BS ISO 21747
BS EN 1456-1
BS EN ISO 17662
BS ISO 8406
ISO8607
BS EN 12617-4
BS EN 12192-1
BS EN 13412
BS EN 13057
BS EN 13441
BS EN 12999 2006
BS EN 13137
ISO/IEC13240
BS EN 14238
DD ENV 14027
BS EN 14268
BS EN 19
BS EN 50123-2
BS EN 12274-8
BS EN 50123-3
BS ISO 10816-5
BS EN 50123-4
BS EN 50123-5
BS EN 13530-1
BS 7291-1
BS EN 50123-6
BS 7291-2
BS 7291-3
BS 5955-8
BS EN 50123-7-1
BS EN 50123-7-2
BS EN 50123-7-3
PAS 41
DD ENV 14194
BS EN 13284-1
BS ISO/IEC 5218
BS ISO 4148
ISO209
BS EN 12371
PD ISO/TR 18569
BS EN 14502-1
BS ISO 15161
BS EN 14198
BS EN 13000
BS EN 14439
BS EN 772-6
BS EN ISO 5269-2
BS EN 50306-4
BS EN 50306-3
BS EN 50306-1
BS EN 50306-2
BS 7985
BS 5325
BS EN 13852-2
BS EN 13157
BS EN 13155
BS EN 13655
BS ISO 3867
BS ISO 3869
BS EN 13528-3
BS EN 13781
KIT 93 KIT 93
ISO5267-2 Canadian standard freeness method
BS EN 14250
BS EN 14251
BS ISO 15724
WD/ISO/IEC14496-1 Systems
BS ISO 491
BS EN 60601-2-49 2001
BS ISO 11393-5
BS EN 1514-6
BS ISO 17058
BS ISO/IEC 15457-1
BS ISO/IEC 15457-2
BS ISO/IEC 11694-4
BS ISO 8600-2
BS ISO 15303
BS ISO 22234
BS ISO 1223
BS 8747
BS ISO 9236-1
BS 5306-3
BS EN 1514-7
BS EN 376
BS EN 592
BS EN 12560-6
BS EN 12560-7
WD/ISO19338
Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards

NFPA Standards

IEEE Standards

Search & Listing Portal

for ASTM Standards

Search & Listing Portal

for ISO Standards

Search & Listing Portal

for IEC Standards

Search & Listing Portal

for BSI Standards

Search & Listing Portal

for DIN Standards

Cheapest Original BSI Standards 2-76

Posted by findstandards in 2009/09/14

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm

 

08/30178258 DC 08/30178258 DC. BS EN 60512-8-3. Connectors for electronic equipment. Tests and measurements. Part 8-3. Static load tests (fixed components). Test 8c. Robustness of actuating lever
08/30178276 DC 08/30178276 DC. BS EN 60512-9-1. Connectors for electronic equipment. Tests and measurements. Part 9-1. Endurance tests. Test 9a. Mechanical operation
08/30178289 DC 08/30178289 DC. BS EN 60512-9-2. Connectors for electronic equipment. Tests and measurements. Part 9-2. Endurance tests. Test 9b. Electrical load and temperature
08/30178299 DC 08/30178299 DC. BS EN 60512-9-4. Connectors for electronic equipment. Tests and measurements. Part 9-4. Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing)
BS EN 861:2007 BS EN 861:2007. Safety of woodworking machines. Surface planing and thicknessing machines
08/30178306 DC 08/30178306 DC. BS EN 60512-9-5. Connectors for electronic equipment. Tests and measurements. Part 9-5. Endurance tests. Test 9e. Current loading, cyclic
BS EN 1870-1:2007+A1:2009 BS EN 1870-1:2007+A1:2009. Safety of woodworking machines. Circular sawing machines. Circular saw benches (with and without sliding table), dimension saws and building site saws
08/30178401 DC 08/30178401 DC. BS ISO/IEC 11976. Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges. Capacity: 60 Gbytes per cartridge. Second generation
08/30178403 DC 08/30178403 DC. BS ISO/IEC 25434. Information technology. Data interchange on 120 mm and 80 mm optical disk using +R DL format. Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed up to 16x)
BS 8469:2007 BS 8469:2007. Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods
08/30178410 DC 08/30178410 DC. BS EN 60512-17-1. Connectors for electronic equipment. Tests and measurements. Part 17-1. Cable clamping tests. Test 17a. Cable clamp robustness
08/30178414 DC 08/30178414 DC. BS EN 60512-17-2. Connectors for electronic equipment. Tests and measurements. Part 17-2. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
08/30178418 DC 08/30178418 DC. BS EN 60512-17-3. Connectors for electronic equipment. Tests and measurements. Part 17-3. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
08/30178422 DC 08/30178422 DC. BS EN 60512-17-4. Connectors for electronic equipment. Tests and measurements. Part 17-4. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
08/30178429 DC 08/30178429 DC. BS EN ISO 659. Oilseeds. Determination of oil content (Reference method)
08/30178445 DC 08/30178445 DC. BS EN 60512-19-1. Connectors for electronic equipment. Tests and measurements. Part 19-1. Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels
08/30178449 DC 08/30178449 DC. BS EN 60512-20-1. Connectors for electronic equipment. Tests and measurements. Part 20-1. Fire hazard tests. Test 20a. Flammability, needle-flame
08/30178453 DC 08/30178453 DC. BS EN 60512-20-3. Connectors for electronic equipment. Tests and measurement. Part 20-3. Fire hazard tests. Test 20c. Flammability, glow-wire
08/30178457 DC 08/30178457 DC. BS EN 60512-21-1. Connectors for electronic equipment. Tests and measurements. Part 21-1. R.F. resistance tests. Test 21a. R.F. shunt resistance
08/30178461 DC 08/30178461 DC. BS EN 60512-22-1. Connectors for electronic equipment. Tests and measurements. Part 22-1. Capacitance tests. Test 22a. Capacitance
08/30178465 DC 08/30178465 DC. BS EN 60512-23-2. Connectors for electronic equipment. Tests and measurements. Part 23-2. Shielding and filtering tests. Test 23b. Suppression characteristics of integral filters
08/30178469 DC 08/30178469 DC. BS EN 60512-24-1. Connectors for electronic equipment. Tests and measurements. Part 24-1. Magnetic interference tests. Test 24a. Residual magnetism
BS EN ISO 80000-8:2007 BS EN ISO 80000-8:2007. Quantities and units. Acoustics
08/30178592 DC 08/30178592 DC. BS ISO 6804. Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers. Specification
08/30178599 DC 08/30178599 DC. BS ISO 702-1. Machine tools. Connecting dimensions of spindle noses and workholding chucks. Part 1. Conical connection
CWA 15808:2008 CWA 15808:2008. Interfaces for heterogeneous missions accessibility (earth observation ground segment interfaces)
CWA 15748-1:2008 CWA 15748-1:2008. Extensions for financial services (XFS) interface specification. Release3.10. Application programming interface (API). Service provider interface (SPI). Programmer’s reference
CWA 15748-2:2008 CWA 15748-2:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Service class definition. Programmer’s reference
CWA 15748-3:2008 CWA 15748-3:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Printer and scanning device class interface. Programmer’s reference
CWA 15748-5:2008 CWA 15748-5:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Cash dispenser device class interface. Programmer’s reference
CWA 15748-6:2008 CWA 15748-6:2008. Extensions for financial services (XFS) interface specification. Release 3.10. PIN keypad device class interface. Programmer’s reference
CWA 15748-4:2008 CWA 15748-4:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Identification card device class interface. Programmer’s reference
CWA 15748-7:2008 CWA 15748-7:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Check reader/scanner device class. Programmer’s reference
CWA 15748-8:2008 CWA 15748-8:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Depository device class interface. Programmer’s reference
CWA 15748-9:2008 CWA 15748-9:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Text terminal unit device class interface. Programmer’s reference
CWA 15748-10:2008 CWA 15748-10:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Sensors and indicators unit device class interface. Programmer’s reference
08/30178660 DC 08/30178660 DC. BS EN 60546-1. Controllers with analogue signals for use in industrial-process control systems. Part 1. Methods of evaluating the performance
08/30178664 DC 08/30178664 DC. BS EN 60546-2. Controllers with analogue signals for use in industrial-process control systems. Part 2. Guidance for inspection and routine testing
08/30178668 DC 08/30178668 DC. BS EN 61378-1. Converter transformers. Part 1. Transformers for industrial applications
BS ISO/IEC 7816-4:2005 BS ISO/IEC 7816-4:2005. Identification cards. Integrated circuit cards. Organization, security and commands for interchange
BS ISO/IEC 7816-5:2004 BS ISO/IEC 7816-5:2004. Identification cards. Integrated circuit cards. Registration of application providers
BS ISO/IEC 7816-6:2004 BS ISO/IEC 7816-6:2004. Identification cards. Integrated circuit cards. Interindustry data elements for interchange
BS ISO/IEC 7816-8:2004 BS ISO/IEC 7816-8:2004. Identification cards. Integrated circuit cards. Commands for security operations
BS ISO/IEC 7816-9:2004 BS ISO/IEC 7816-9:2004. Identification cards. Integrated cicuit cards. Commands for card management
BS ISO/IEC 7816-11:2004 BS ISO/IEC 7816-11:2004. Identification cards. Integrated circuit cards. Personal verification through biometric methods
BS ISO/IEC 7816-15:2004+A1:2007 BS ISO/IEC 7816-15:2004+A1:2007. Identification cards. Integrated circuit cards. Cryptographic information application
08/30178732 DC 08/30178732 DC. BS EN 61300-3-9. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-9. Examinations and measurements. Crosstalk
08/30178742 DC 08/30178742 DC. BS EN 62546. HD recording link guideline (TA9)
08/30178754 DC 08/30178754 DC. BS EN 60268-7. Sound system equipment. Part 7. Headphones and earphones (GMT)
08/30178800 DC 08/30178800 DC. BS EN 196-6. Methods of testing cement. Part 6. Determination of fineness
08/30178810 DC 08/30178810 DC. BS EN 12750. Safety of woodworking machines. Four sided moulding machines
CWA 15748-11:2008 CWA 15748-11:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Vendor dependent mode device class interface. Programmer’s reference
CWA 15748-12:2008 CWA 15748-12:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Camera device class interface. Programmer’s reference
CWA 15748-13:2008 CWA 15748-13:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Alarm device class interface. Programmer’s reference
CWA 15748-14:2008 CWA 15748-14:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Card embossing unit device class interface. Programmer’s reference
CWA 15748-15:2008 CWA 15748-15:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Cash-in module device class interface. Programmer’s reference
CWA 15748-16:2008 CWA 15748-16:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Card dispenser device class interface. Programmer’s reference
CWA 15748-17:2008 CWA 15748-17:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Barcode reader device class interface. Programmer’s reference
CWA 15748-18:2008 CWA 15748-18:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Item processing module device class interface. Programmer’s reference
CWA 15748-61:2008 CWA 15748-61:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Application programming interface (API). Service provider interface (SPI). Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-62:2008 CWA 15748-62:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Printer and scanning device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
08/30178922 DC 08/30178922 DC. BS ISO/IEC 14496-10 AMD1. Information technology. Coding of audio-visual objects. Part 10. Advanced video coding
CWA 15748-63:2008 CWA 15748-63:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Identification card class interface migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-64:2008 CWA 15748-64:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Cash dispenser device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-65:2008 CWA 15748-65:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Pin keybad device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-66:2008 CWA 15748-66:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Check reader/scanner device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-67:2008 CWA 15748-67:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Depository device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-68:2008 CWA 15748-68:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Text terminal unit device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-69:2008 CWA 15748-69:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Sensors and indicators unit device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-70:2008 CWA 15748-70:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Vendor dependent mode device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-71:2008 CWA 15748-71:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Camera device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-72:2008 CWA 15748-72:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Alarm device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-73:2008 CWA 15748-73:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Card embossing unit device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
CWA 15748-74:2008 CWA 15748-74:2008. Extensions for financial services (XFS) interface specification. Release 3.10. Cash-in module device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer’s reference
08/30178957 DC 08/30178957 DC. BS ISO 3771/BS 2000-276. Petroleum products. Determination of base number. Perchloric acid potentiometric titration method
08/30178966 DC 08/30178966 DC. BS ISO 18435-1. Industrial automation systems and integration. Diagnostics, capability assessment, and maintenance applications integration. Part 1. Overview and general requirements
BS EN ISO 1167-2:2006 BS EN ISO 1167-2:2006. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of pipe test pieces
BS EN ISO 1167-1:2006 BS EN ISO 1167-1:2006. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. General method
08/30179021 DC 08/30179021 DC. BS EN ISO 27587. Leather. Chemical tests. Determination of the free formaldehyde in process auxiliaries
08/30179025 DC 08/30179025 DC. BS EN ISO 10673. Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
08/30179029 DC 08/30179029 DC. BS EN ISO 3758. Textiles. Care labelling code using symbols
08/30179055 DC 08/30179055 DC. BS 8215 AMD1. Code of practice for design and installation of damp-proof courses in masonry construction
BS ISO 17484-1:2006 BS ISO 17484-1:2006. Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems
CWA 15770:2008 CWA 15770:2008. Modelling for automotive repair information. Applications
08/30179084 DC 08/30179084 DC. BS EN 62577. Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz – 40 GHz)
08/30179134 DC 08/30179134 DC. BS EN 60143-4. Series capacitors for power systems. Part 4. Thyristor controlled series capacitors
08/30179153 DC 08/30179153 DC. BS EN 61076-3-118. Connectors for electronic equipment. Product requirements. Part 3-118. Rectangular connectors. Detail specification for a 4 poles + PE power connector with push-pull coupling
08/30179160 DC 08/30179160 DC. BS ISO 1501. ISO miniature screw threads
BS EN 60915:2007 BS EN 60915:2007. Capacitors and resistors for use in electronic equipment. Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
BS EN 474-1:2006+A1:2009 BS EN 474-1:2006+A1:2009. Earth-moving machinery. Safety. General requirements
BS EN 474-2:2006+A1:2008 BS EN 474-2:2006+A1:2008. Earth-moving machinery. Safety. Requirements for tractor-dozers
BS EN 474-3:2006+A1:2009 BS EN 474-3:2006+A1:2009. Earth-moving machinery. Safety. Requirements for loaders
BS EN 474-5:2006+A1:2009 BS EN 474-5:2006+A1:2009. Earth-moving machinery. Safety. Requirements for hydraulic excavators
BS EN 474-7:2006+A1:2009 BS EN 474-7:2006+A1:2009. Earth-moving machinery. Safety. Requirements for scrapers
BS EN 474-12:2006+A1:2008 BS EN 474-12:2006+A1:2008. Earth-moving machinery. Safety. Requirements for cable excavators
BS EN 14364:2006+A1:2008 BS EN 14364:2006+A1:2008. Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints
BS EN 1796:2006+A1:2008 BS EN 1796:2006+A1:2008. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
08/30179399 DC 08/30179399 DC. BS EN 50131-1. Intruder and hold-up alarms. Part 1. System requirements. Interpretation Sheet No. 1
08/30179436 DC 08/30179436 DC. BS EN 60050-113. International Electrotechnical Vocabulary. Part 113. Physics for electrotechnology
08/30179455 DC 08/30179455 DC. BS EN 62458. Sound system equipment. Electroacoustical transducers. Measurement of large signal parameters
08/30179459 DC 08/30179459 DC. BS EN 62459. Sound system equipment. Electroacoustical transducers. Measurement of suspension parts (TC 100)
08/30179468 DC 08/30179468 DC. BS EN 62271-203. High-voltage switchgear and controlgear. Part 203. Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
08/30179472 DC 08/30179472 DC. BS ISO/IEC 14496-4 AMD31. Information technology. Coding of audio-visual objects. Part 4. Conformance testing
08/30179483 DC 08/30179483 DC. BS EN ISO 105-F02. Textiles. Tests for colour fastness. Part F02. Specification for cotton and viscose adjacent fabrics
08/30179495 DC 08/30179495 DC. BS EN ISO 105-F09. Textiles. Tests for colour fastness. Part F09. Specification for cotton rubbing cloth
08/30179526 DC 08/30179526 DC. BS ISO/IEC 11976. Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges. Capacity: 60 Gbytes per cartridge. Second generation
08/30179528 DC 08/30179528 DC. BS ISO/IEC 25434. Information technology. Data interchange on 120 mm and 80 mm optical disk using +R DL format. Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed up to 16x)
08/30179572 DC 08/30179572 DC. BS ISO 11663. Quality of dialysis fluid for haemodialysis and related therapies
08/30179577 DC 08/30179577 DC. BS ISO 23570-3 AMD1. Industrial automation systems and integration. Distributed installation in industrial applications. Part 3. Power distribution bus
08/30179586 DC 08/30179586 DC. BS ISO 7199. Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)
08/30179589 DC 08/30179589 DC. BS ISO 15674. Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
08/30179592 DC 08/30179592 DC. BS ISO 15675. Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters
08/30179595 DC 08/30179595 DC. BS ISO 13958. Concentrates for haemodialysis and related therapies
08/30179598 DC 08/30179598 DC. BS ISO 13959. Water for haemodialysis and related therapies
08/30179601 DC 08/30179601 DC. BS ISO 26722. Water treatment equipment for haemodialysis applications and related therapies
08/30179611 DC 08/30179611 DC. BS EN 62150-4. Fibre optic active components and devices. Basic test and measurement procedures. Part 4. Relative intensity noise using a time-domain optical detection system
08/30179648 DC 08/30179648 DC. BS ISO 13584-42. Industrial automation systems and integration. Parts library. Part 42. Description methodology. Methodology for structuring part families
BS EN 61326-1:2006 BS EN 61326-1:2006. Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
08/30179691 DC 08/30179691 DC. BS ISO 16630. Metallic materials. Method of hole expanding test
BS EN 378-2:2008+A1:2009 BS EN 378-2:2008+A1:2009. Refrigerating systems and heat pumps. Safety and environmental requirements. Design, construction, testing, marking and documentation
08/30179858 DC 08/30179858 DC. BS EN 61280-1-4. Fibre optic communication subsystem test procedures. Part 1-4. General communication subsystems. Light source encircled flux measurement method
08/30179863 DC 08/30179863 DC. BS EN 55013 AMD3. Sound and television broadcast Receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
08/30179894 DC 08/30179894 DC. BS ISO 11783-6. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 6. Virtual terminal
ISO4898 : 2008 EDTN4 ISO4898 : 2008 EDTN4. ISO4898 : 2008 Rigid cellular plastics – Thermal insulation products for buildings – Specifications